现在的位置: 首页 > 综合 > 正文

Linux socket 数据包

2013年03月06日 ⁄ 综合 ⁄ 共 4397字 ⁄ 字号 评论关闭

来源: http://www.cnblogs.com/uvsjoh/archive/2012/12/31/2840883.html

我们平常所用到的网络编程都是在应用层收发数据,每个程序只能收到发给自己的数据,即每个程序只能收到来自该程序绑定的端口的数据。收到的数据往往只包括应用层数据。某些情况下我们需要执行更底层的操作,比如监听所有本机收发的数据、修改报头等。

通过原始套接字,我们可以抓取所有发送到本机的IP包(包括IP头和TCP/UDP/ICMP包头),也可以抓取所有本机收到的帧(包括数据链路层协议头)。普通的套接字无法处理ICMP、IGMP等网络报文,而SOCK_RAW可以。利用原始套接字,我们可以自己构造IP头。

有两种原始套接字
一种是处理IP层即其上的数据,通过指定socket第一个参数为AF_INET来创建这种套接字。
另一种是处理数据链路层即其上的数据,通过指定socket第一个参数为AF_PACKET来创建这种套接字。

AF_INET表示获取从网络层开始的数据
socket(AF_INET, SOCK_RAW, …)
当接收包时,表示用户获得完整的包含IP报头的数据包,即数据从IP报头开始算起。
当发送包时,用户只能发送包含TCP报头或UDP报头或包含其他传输协议的报文,IP报头以及以太网帧头则由内核自动加封。除非是设置了IP_HDRINCL的socket选项。
如果第二个参数为SOCK_STREAM, SOCK_DGRAM,表示接收的数据直接为应用层数据。

PF_PACKET,表示获取的数据是从数据链路层开始的数据
socket(PF_PACKET,SOCK_RAW,htos(ETH_P_IP)):表示获得IPV4的数据链路层帧,即数据包含以太网帧头。14+20+(8:udp 或 20:tcp)
ETH_P_IP: 在<linux/if_ether.h>中定义,可以查看该文件了解支持的其它协议。
SOCK_RAW, SOCK_DGRAM两个参数都可以使用,区别在于使用SOCK_DGRAM收到的数据不包括数据链路层协议头。

总结起来就是:
socket(AF_INET, SOCK_RAW, IPPROTO_TCP|IPPROTO_UDP|IPPROTO_ICMP)发送接收ip数据包
能:该套接字可以接收协议类型为(tcp udp icmp等)发往本机的ip数据包
不能:收到非发往本地ip的数据包(ip软过滤会丢弃这些不是发往本机ip的数据包)
不能:收到从本机发送出去的数据包
发送的话需要自己组织tcp udp icmp等头部.可以setsockopt来自己包装ip头部
这种套接字用来写个ping程序比较适合

socket(PF_PACKET, SOCK_RAW|SOCK_DGRAM, htons(ETH_P_IP|ETH_P_ARP|ETH_P_ALL))发送接收以太网数据帧
这种套接字比较强大,可以监听网卡上的所有数据帧

能: 接收发往本地mac的数据帧
能: 接收从本机发送出去的数据帧(第3个参数需要设置为ETH_P_ALL)
能: 接收非发往本地mac的数据帧(网卡需要设置为promisc混杂模式)
协议类型一共有四个
ETH_P_IP 0x800 只接收发往本机mac的ip类型的数据帧
ETH_P_ARP 0x806 只接受发往本机mac的arp类型的数据帧
ETH_P_RARP 0x8035 只接受发往本机mac的rarp类型的数据帧
ETH_P_ALL 0x3 接收发往本机mac的所有类型ip arp rarp的数据帧, 接收从本机发出的所有类型的数据帧.(混杂模式打开的情况下,会接收到非发往本地mac的数据帧)


应用例子:抓取所有IP包

复制代码
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <net/if.h>
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <linux/if_packet.h>
#include <netinet/if_ether.h>
#include <netinet/in.h>

typedef struct _iphdr //定义IP首部 
{ 
    unsigned char h_verlen; //4位首部长度+4位IP版本号 
    unsigned char tos; //8位服务类型TOS 
    unsigned short total_len; //16位总长度(字节) 
    unsigned short ident; //16位标识 
    unsigned short frag_and_flags; //3位标志位 
    unsigned char ttl; //8位生存时间 TTL 
    unsigned char proto; //8位协议 (TCP, UDP 或其他) 
    unsigned short checksum; //16位IP首部校验和 
    unsigned int sourceIP; //32位源IP地址 
    unsigned int destIP; //32位目的IP地址 
}IP_HEADER; 

typedef struct _udphdr //定义UDP首部
{
    unsigned short uh_sport;    //16位源端口
    unsigned short uh_dport;    //16位目的端口
    unsigned int uh_len;//16位UDP包长度
    unsigned int uh_sum;//16位校验和
}UDP_HEADER;

typedef struct _tcphdr //定义TCP首部 
{ 
    unsigned short th_sport; //16位源端口 
    unsigned short th_dport; //16位目的端口 
    unsigned int th_seq; //32位序列号 
    unsigned int th_ack; //32位确认号 
    unsigned char th_lenres;//4位首部长度/6位保留字 
    unsigned char th_flag; //6位标志位
    unsigned short th_win; //16位窗口大小
    unsigned short th_sum; //16位校验和
    unsigned short th_urp; //16位紧急数据偏移量
}TCP_HEADER; 

typedef struct _icmphdr {  
    unsigned char  icmp_type;  
    unsigned char icmp_code; /* type sub code */  
    unsigned short icmp_cksum;  
    unsigned short icmp_id;  
    unsigned short icmp_seq;  
    /* This is not the std header, but we reserve space for time */  
    unsigned short icmp_timestamp;  
}ICMP_HEADER;

void analyseIP(IP_HEADER *ip);
void analyseTCP(TCP_HEADER *tcp);
void analyseUDP(UDP_HEADER *udp);
void analyseICMP(ICMP_HEADER *icmp);


int main(void)
{
    int sockfd;
     IP_HEADER *ip;
    char buf[10240];
    ssize_t n;
    /* capture ip datagram without ethernet header */
    if ((sockfd = socket(PF_PACKET,  SOCK_DGRAM, htons(ETH_P_IP)))== -1)
    {    
        printf("socket error!\n");
        return 1;
    }
    while (1)
    {
        n = recv(sockfd, buf, sizeof(buf), 0);
        if (n == -1)
        {
            printf("recv error!\n");
            break;
        }
        else if (n==0)
            continue;
        //接收数据不包括数据链路帧头
        ip = ( IP_HEADER *)(buf);
        analyseIP(ip);
        size_t iplen =  (ip->h_verlen&0x0f)*4;
        TCP_HEADER *tcp = (TCP_HEADER *)(buf +iplen);
        if (ip->proto == IPPROTO_TCP)
        {
            TCP_HEADER *tcp = (TCP_HEADER *)(buf +iplen);
            analyseTCP(tcp);
        }
        else if (ip->proto == IPPROTO_UDP)
        {
            UDP_HEADER *udp = (UDP_HEADER *)(buf + iplen);
            analyseUDP(udp);
        }
        else if (ip->proto == IPPROTO_ICMP)
        {
            ICMP_HEADER *icmp = (ICMP_HEADER *)(buf + iplen);
            analyseICMP(icmp);
        }
        else if (ip->proto == IPPROTO_IGMP)
        {
            printf("IGMP----\n");
        }
        else
        {
            printf("other protocol!\n");
        }        
        printf("\n\n");
    }
    close(sockfd);
    return 0;
}

void analyseIP(IP_HEADER *ip)
{
    unsigned char* p = (unsigned char*)&ip->sourceIP;
    printf("Source IP\t: %u.%u.%u.%u\n",p[0],p[1],p[2],p[3]);
    p = (unsigned char*)&ip->destIP;
    printf("Destination IP\t: %u.%u.%u.%u\n",p[0],p[1],p[2],p[3]);

}

void analyseTCP(TCP_HEADER *tcp)
{
    printf("TCP -----\n");
    printf("Source port: %u\n", ntohs(tcp->th_sport));
    printf("Dest port: %u\n", ntohs(tcp->th_dport));
}

void analyseUDP(UDP_HEADER *udp)
{
    printf("UDP -----\n");
    printf("Source port: %u\n", ntohs(udp->uh_sport));
    printf("Dest port: %u\n", ntohs(udp->uh_dport));
}

void analyseICMP(ICMP_HEADER *icmp)
{
    printf("ICMP -----\n");
    printf("type: %u\n", icmp->icmp_type);
    printf("sub code: %u\n", icmp->icmp_code);
}
复制代码

 参考:http://baike.baidu.com/view/4263346.htm

抱歉!评论已关闭.