现在的位置: 首页 > 综合 > 正文

Linux下的网络配置命令

2013年03月08日 ⁄ 综合 ⁄ 共 1523字 ⁄ 字号 评论关闭
1、 ifconfig
可以使用ifconfig命令来配置并查看网络接口的配置情况。
例如:
(1) 配置eth0的IP地址, 同时激活该设备。
#ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up
(2) 配置eth0别名设备eth0:1的IP地址,并添加路由。
#ifconfig eth0  192.168.1.3
#route add –host 192.168.1.3 dev eth0:1
(3) 激活设备。
#ifconfig eth0 up
(4) 禁用设备。
#ifconfig eth0 down
(5) 查看指定的网络接口的配置。
#ifconfig eth0
(6) 查看所有的网络接口配置。
#ifconfig
2、 route
可以使用route命令来配置并查看内核路由表的配置情况。
例如:
(1) 添加到主机的路由。
#route add –host 192.168.1.2 dev eth0:0
#route add –host 10.20.30.148 gw 10.20.30.40
(2) 添加到网络的路由。
#route add –net 10.20.30.40 netmask 255.255.255.248 eth0
#route add –net 10.20.30.48 netmask 255.255.255.248 gw 10.20.30.41
#route add –net 192.168.1.0/24 eth1
(3) 添加默认网关。
#route add default gw 192.168.1.1
(4) 查看内核路由表的配置。
#route
(5)删除路由。
#route del –host 192.168.1.2 dev eth0:0
#route del –host 10.20.30.148 gw 10.20.30.40
#route del –net 10.20.30.40 netmask 255.255.255.248 eth0
#route del –net 10.20.30.48 netmask 255.255.255.248 gw 10.20.30.41
#route del –net 192.168.1.0/24 eth1
#route del default gw 192.168.1.1
对于1和2两点可使用下面的语句实现:
Ifconfig eth0 172.16.19.71 netmask 255.255.255.0
Route 0.0.0.0 gw 172.16.19.254
Service network restart
3、 traceroute
可以使用traceroute命令显示数据包到达目的主机所经过的路由。
例如:
#traceroute www.sina.com.cn
4、 ping
可以使用ping 命令来测试网络的连通性。
例如:
#ping www.sina.com.cn
#ping –c 4 192.168.1.12
5、 netstat
可以使用netstat命令来显示网络状态信息。
例如:
(1) 显示网络接口状态信息。
#netstat –i
(2) 显示所有监控中的服务器的Socket和正使用Socket的程序信息。
#netstat –lpe
(3) 显示内核路由表信息。
#netstat –r
#netstat –nr
(4) 显示TCP/UDP传输协议的连接状态。
#netstat –t
#netstat –u
6、 hostname
可以使用hostname命令来更改主机名。例如;
#hostname myhost
7、 arp
可以使用arp命令来配置并查看arp缓存。例如:
(1) 查看arp缓存。
#arp
(2) 添加一个IP地址和MAC地址的对应记录。
#arp –s 192.168.33.15 00:60:08:27:CE:B2
(3) 删除一个IP地址和MAC地址的对应缓存记录。
#arp –d192.168.33.15
 

抱歉!评论已关闭.