现在的位置: 首页 > 综合 > 正文

在linux内核中操作文件的方法–使用get_fs()和set_fs(get_ds())

2012年09月20日 ⁄ 综合 ⁄ 共 2504字 ⁄ 字号 评论关闭
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/syscalls.h>
#include <asm/unistd.h>
#include <asm/uaccess.h>

#define MY_FILE "/tmp/LogFile"

char buf[128];
struct file *file = NULL;

static int __init init(void)
{
        mm_segment_t old_fs;
        printk("Hello, I'm the module that intends to write messages to file.\n");

        if(file == NULL)
                file = filp_open(MY_FILE, O_RDWR | O_APPEND | O_CREAT, 0644);
        if (IS_ERR(file)) {
                printk("error occured while opening file %s, exiting...\n", MY_FILE);
                return 0;
        }

        sprintf(buf,"%s", "The Messages.");

        old_fs = get_fs();
        set_fs(get_ds()); //set_fs(KERNEL_DS);
        file->f_op->write(file, (char *)buf, sizeof(buf), &file->f_pos);
        set_fs(old_fs);

        return 0;
}

static void __exit exit(void)
{
        if(file != NULL)
                filp_close(file, NULL);
}

module_init(init);
module_exit(exit);
MODULE_LICENSE("GPL");

其中:

    
typedef struct {

         unsigned long seg;

    } mm_segment_t;


    #define KERNEL_DS    MAKE_MM_SEG(0xFFFFFFFFUL)


    #define MAKE_MM_SEG(s)    ((mm_segment_t) { (s) })


基本思想:

   
一个是要记得编译的时候加上-D__KERNEL_SYSCALLS__   

  另外源文件里面要#include   <linux/unistd.h>   

  如果报错,很可能是因为使用的缓冲区超过了用户空间的地址范围。一般系统调用会要求你使用的缓冲区不能在内核区。这个可以用set_fs()、get_fs()来解决。在读写文件前先得到当前fs:   

  mm_segment_t   old_fs=get_fs();   

  并设置当前fs为内核fs:set_fs(KERNEL_DS);   

  在读写文件后再恢复原先fs:   set_fs(old_fs);   

  set_fs()、get_fs()等相关宏在文件include/asm/uaccess.h中定义。   

  个人感觉这个办法比较简单。   

    

  另外就是用flip_open函数打开文件,得到struct file *的指针fp。使用指针fp进行相应操作,如读文件可以用fp->f_ops->read。最后用filp_close()函数关闭文件。 filp_open()、filp_close()函数在fs/open.c定义,在include/linux/fs.h中声明。  


解释一点:

    
系统调用本来是提供给用户空间的程序访问的,所以,对传递给它的参数(比如上面的buf),它默认会认为来自用户空间,在->write()函数中,
为了保护内核空间,一般会用get_fs()得到的值来和USER_DS进行比较,从而防止用户空间程序“蓄意”破坏内核空间;


   而现在要在内核空间使用系统调用,此时传递给->write()的参数地址就是内核空间的地址了,在USER_DS之上(USER_DS ~ KERNEL_DS),如果不做任何其它处理,在write()函数中,会认为该地址超过了USER_DS范围,所以会认为是用户空间的“蓄意破坏”,从 而不允许进一步的执行; 为了解决这个问题; set_fs(KERNEL_DS);将其能访问的空间限制扩大到KERNEL_DS,这样就可以在内核顺利使用系统调用了!

补充:

    我看了一下源码,在include/asm/uaccess.h中,有如下定义: 

    #define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) 
    #define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) 
    #define USER_DS MAKE_MM_SEG(PAGE_OFFSET) 
    #define get_ds() (KERNEL_DS) 
    #define get_fs() (current->addr_limit) 
    #define set_fs(x) (current->addr_limit = (x)) 


而它的注释也很清楚: 
/* 
* The fs value determines whether argument validity checking should be 
* performed or not. If get_fs() == USER_DS, checking is performed, with 
* get_fs() == KERNEL_DS, checking is bypassed. 

* For historical reasons, these macros are grossly misnamed. 
*/ 


因此可以看到,fs的值是作为是否进行参数检查的标志。系统调用的参数要求必须来自用户空间,所以,当在内核中使用系统调用的时候,set_fs(get_ds())改变了用户空间的限制,即扩大了用户空间范围,因此即可使用在内核中的参数了。

抱歉!评论已关闭.