现在的位置: 首页 > 综合 > 正文

在redhat linux下配置vsftpd服务器

2013年08月16日 ⁄ 综合 ⁄ 共 9774字 ⁄ 字号 评论关闭

ftp服务器

1、  在Linux和其他机器之间共享文件(在linux下安装ftp)

2、  具体安装步骤:

a)        首先查看我的Redhat5上是否已经安装

rpm -qa|grep vsftpd

b)        查看服务的运行状态;

Service iptables status

c)        安装. 如果没有安装话,就要选择一种方式安装

                        i.             可以到官方网站去下载
http://vsftpd.beasts.org
也可以用光盘安装,RedHat 5的安盘里自带的,所以我选择光盘安装

                       ii.   (1)先把光盘                  挂载到系统上:
mount /dev/cdrom /mnt
这样光盘的内容就被挂载到/mnt的设备上,现在可以通过/mnt访问光盘上的内容了

                     iii.   .进入光盘,查找安装包,cd /mnt/Packages

                     iv.   4.找到安装包vsftp-0.17-17.i386.rpm

                       v.   5.安装程序,rpm -ivh vsftp-0.17-17.i386.rpm

                     vi.   再rpm -qa| grep vsftpd检测是否安装(出现rpm -ivh vsftp-0.17-17.i386.rpm表示已经安装完成)

3、  ftp服务的启动和关闭命令为:service vsftpd strat/stop/restart

4、  默认的ftp服务器命令:

a)        启动:service vsftpd start(其中vsftpd的最后面的那个d代表是在后台进行的进程)

b)        登录:ftp localhost

c)        退出:bye

5、  Linux查询ip(ifconfig)

6、  Vmware在安装之后会有三个连接,两个是虚拟的(也是windows用的),虚拟的那一块网卡也是虚拟的,只要把这个网卡放在,其中的任何一个网段,就可以通了。

7、  在windows下ping linux如果linux下安装了防火墙那么是ping不能的。在默认情况下,linux是安装防火墙的,防火墙也会阻止ftp服务器

解决办法是,打开端口或者关闭防火墙

8、  关闭防火墙:service iptables stop

9、  当不知道允许不允许,可以看ftp主要配置文件:

/etc/vsftpd下面vsftpd.conf

在linux下面大部分都有一个配置文件。

10、             VsFtp的配置文件

a)        /etc/vsftpd/vsftpd.conf----------主配置文件

b)        /etc/rc.d/init.d/vsftpd ----------启动脚本

c)        /etc/pam.d/vsftpd    ----------- PAM认证文件(此文件中file=/etc/vsftpd/ftpusers字段,指明阻止访问的用户来自/etc/vsftpd/ftpusers文件中的用户)

d)        /etc/vsftpd/ftpusers-------------禁止使用vsftpd的用户列表文件。记录不允许访问FTP服务器的用户名单,管理员可以把一些对系统安全有威胁的用户账号记录在此文件中,以免用户从FTP登录后获得大于上传下载操作的权利,而对系统造成损坏。

e)        /etc/vsftpd/user_list-------------禁止或允许使用vsftpd的用户列表文件。这个文件中指定的用户缺省情况(即在/etc/vsftpd/vsftpd.conf中设置userlist_deny=YES)下也不能访问FTP服务器,在设置了userlist_deny=NO时,仅允许user_list中指定的用户访问FTP服务器。

f)         /var/ftp -----------------------------匿名用户主目录;本地用户主目录为:/home/用户主目录,即登录后进入自己家目录

g)        /var/ftp/pub------------------------匿名用户的下载目录,此目录需赋权根chmod 1777 pub(1为特殊权限,使上载后无法删除)

h)   /etc/logrotate.d/vsftpd.log--- Vsftpd的日志文件

11、             下面对主要的配置文件进行介绍:

Ø #Example config file /etc/vsftpd/vsftpd.conf

Ø # Thedefault compiled in settings are fairly paranoid. This sample file

Ø #loosens things up a bit, to make the ftp daemon more usable.

Ø #Please see vsftpd.conf.5 forall compiled in defaults.

Ø # READTHIS: This example file is NOT an exhaustive list of vsftpd options.

Ø #Please read the vsftpd.conf.5 manualpage to get a full idea of vsftpd's

Ø #capabilities.

Ø #Allow anonymous FTP? (Beware - allowed by default if you comment this out).

Ø anonymous_enable=YES ( 是否允许 匿名登录FTP 服务器,默认设置为YES 允许,即用户可使用用户名ftp 或anonymous 进行ftp登录,口令为用户的E-mail 地址。如不允许匿名访问去掉前面#并设置为NO )

Ø #Uncomment this to allow local users to log in.

Ø local_enable=YES (是否允许本地用户 ( 即 linux 系统中的用户帐号) 登录FTP服务器,默认设置为YES允许, 本地用户登录后会进入用户主目录,而匿名用户登录后进入匿名用户的下载目录/var/ftp/pub ;若只允许匿名用户访问,前面加上#,可 阻止本地用户访问FTP 服务器。)

Ø #Uncomment this to enable any form of FTP write command.

Ø write_enable=YES  ( 是否允许本地用户对 FTP 服务器文件具有写权限 , 默认设置为 YES 允许 )

Ø #Default umask for local users is 077. You may wish to change this to 022,

Ø # ifyour users expect that (022 is used by most other ftpd's)

Ø # local_umask=022 (或其它值,设置本地用户的文件掩码 为缺省022,也可根据个人喜好将其设置为其他值,默认值为077)

Ø #Uncomment this to allow the anonymous FTP user to upload files. This only

Ø # hasan effect if the above global write enable is activated. Also, you will

Ø #obviously need to create a directory writable by the FTP user.

Ø #anon_upload_enable=YES ( 是否允许匿名用户上传文件 , 须将 write_enable=YES , 默认设置为 YES 允许 )

Ø #Uncomment this if you want the anonymous FTP user to be able to create

Ø # newdirectories.

Ø #anon_mkdir_write_enable=YES   ( 是否允许匿名用户创建新文件夹 , 默认设置为 YES 允许 )

Ø #Activate directory messages - messages given to remote users when they

Ø # gointo a certain directory.

Ø #dirmessage_enable=YES ( 是否激活目录欢迎信息功能 , 当用户用 CMD模式首次访问服务器上某个目录时 ,FTP 服务器将显示欢迎信息 , 默认情况下 , 欢迎信息是通过 该 目录下的 .message 文件获得的,此文件保存自定义的欢迎信息,由用户自己建立)

Ø #Activate logging of uploads/downloads.

Ø xferlog_enable=YES ( 默认值为 NO 如果启用此选项,系统将会维护记录服务器上传和下载情况的日志文件,默认情况该日志文件为/var/log/vsftpd.log, 也可以通过下面的 xferlog_file 选项对其进行设定。)

Ø # Makesure PORT transfer connections originate from port 20 (ftp-data).

Ø connect_from_port_20=YES ( 设定 FTP 服务器将启用 FTP 数据端口的连接请求 ,ftp-data 数据传输 ,21 为连接控制端口 )

Ø # Ifyou want, you can arrange for uploaded anonymous files to be owned by

Ø # adifferent user. Note! Using "root" for uploaded files is not

Ø #recommended!-注意,不推荐使用 root 用户上传文件

Ø #chown_uploads=YES ( 设定是否允许 改变 上传文件的属主 , 与下面一个设定项配合使用 )

Ø #chown_username=whoeve r ( 设置想要改变的上传文件的属主 , 如果需要 , 则输入一个系统用户名 , 例如可以把上传的文件都改成 root 属主。whoever :任何人)

Ø # Youmay override where the log file goes if you like. The default is shown

Ø #below.

Ø #xferlog_file=/var/log/vsftpd.log ( 设定系统维护记录FTP 服务器上传和下载情况的日志文件,/var/log/vsftpd.log 是默认的,也可以另设其它)

Ø # Ifyou want, you can have your log file in standard ftpd xferlog format

Ø #xferlog_std_format=YES ( 如果启用此选项 , 传输日志文件将以标准 xferlog 的格式书写,该格式的日志文件默认为/var/log/xferlog,也可以通过xferlog_file 选项对其进行设定,默认值为NO)

Ø #dual_log_enable ( 如果添加并启用此选项,将生成两个相似的日志文件,默认在/var/log/xferlog和/var/log/vsftpd.log 目录下。前者是wu_ftpd类型的传输日志,可以利用标准日志工具对其进行分析;后者是vsftpd 类型的日志)

Ø #syslog_enable ( 如果添加并启用此选项,则原本应该输出到/var/log/vsftpd.log 中的日志,将输出到系统日志中)

Ø # Youmay change the default value for timing out an idle session.

Ø #idle_session_timeout=600 (设置数据传输中断间隔时间,此语句表示空闲的用户会话中断时间为600秒,即当数据传输结束后,用户连接FTP服务器的时间不应超过600秒,可以根据实际情况对该值进行修改)

Ø # Youmay change the default value for timing out a data connection.

Ø #data_connection_timeout=120 ( 设置数据连接超时时间 , 该语句表示数据连接超时时间为 120 秒 , 可根据实际情况对其个修改 )

Ø # Itis recommended that you define on your system a unique user which the

Ø # ftpserver can use as a totally isolated and unprivileged user.

Ø #nopriv_user=ftpsecure ( 运行 vsftpd 需要的非特权系统用户,缺省是nobody )

Ø #Enable this and the server will recognise asynchronous ABOR requests. Not

Ø #recommended for security (the code is non-trivial). Not enabling it,

Ø #however, may confuse older FTP clients.

Ø #async_abor_enable=YES ( 如果 FTPclient 会下达“async ABOR ”这个指令时,这个设定才需要启用,而一般此设定并不安全,所以通常将其取消)

Ø # Bydefault the server will pretend to allow ASCII mode but in fact ignore

Ø # therequest. Turn on the below options to have the server actually do ASCII

Ø #mangling on files when in ASCII mode.

Ø #Beware that on some FTP servers, ASCII support allows a denial of service

Ø #attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd

Ø #predicted this attack and has always been safe, reporting the size of the

Ø # rawfile.

Ø #ASCII mangling is a horrible feature of the protocol.

Ø #ascii_upload_enable=YES ( 大多数 FTP 服务器都选择用 ASCII 方式传输数据 , 将 # 去掉就能实现用 ASCII 方式上传和下载文件 )

Ø #ascii_download_enable=YES ( 将 # 去掉就能实现用 ASCII 方式下载文件 )

Ø # Youmay fully customise the login banner string:

Ø #ftpd_banner=Welcome to blah FTP service. (将#去掉可设置登录FTP服务器时显示的欢迎信息,可以修改=后的欢迎信息内容。另外如在需要设置更改目录欢迎信息的目录下创建名为 .message 的文件,并写入欢迎信息保存后,在进入到此目录会显示自定义欢迎信息 )

Ø # Youmay specify a file of disallowed anonymous e-mail addresses. Apparently

Ø #useful for combatting certain DoS attacks.

Ø #deny_email_enable=YES ( 可将某些特殊的 email address 抵挡住。如果以anonymous 登录服务器时,会要求输入密码,也就是您的email address, 如果很讨厌某些email address ,就可以使用此设定来取消他的登录权限,但必须与下面的设置项配合 )

Ø #(default follows)

Ø #banned_email_file=/etc/vsftpd/banned_emails (当上面的 deny_email_enable=YES 时,可以利用这个设定项来规定那个email address 不可登录vsftpd 服务器,此文件需用户自己创建,一行一个email address 即可! )

Ø # Youmay specify an explicit list of local users to chroot() to their home

Ø #directory. If chroot_local_user is YES, then this list becomes a list of

Ø #users to NOT chroot().

Ø #chroot_list_enable=YES ( 设置为 NO 时,用户登录FTP 服务器后具有访问自己目录以外的其他文件的权限, 设置为 YES 时 , 用户被锁定在自己的 home 目录中,vsftpd 将在下面 chroot_list_file 选项值的位置寻找 chroot_list 文件,此文件需用户建立, 再将需锁定在自己home 目录的用户列入其中,每行一个用户)

Ø #(default follows)

Ø #chroot_list_file=/etc/vsftpd/chroot_list ( 此文件需自己建立 , 被列入此文件的用户 , 在登录后将不能切换到自己目录以外的其他目录 , 由 FTP 服务器自动地 chrooted 到用户自己的home 目录下,使得 chroot_list 文件中的用户不能随意转到其他用户的FTP home 目录下,从而有利于FTP 服务器的安全管理和隐私保护)

Ø # Youmay activate the "-R" option to the builtin ls. This is disabled by

Ø #default to avoid remote users being able to cause excessive I/O on large

Ø #sites. However, some broken FTP clients such as "ncftp" and"mirror" assume

Ø # thepresence of the "-R" option, so there is a strong case for enablingit.

Ø #ls_recurse_enable=YES ( 是否允许递归查询 , 大型站点的 FTP 服务器启用此项可以方便远程用户查询

Ø # When"listen" directive is enabled, vsftpd runs in standalone mode and

Ø #listens on IPv4 sockets. This directive cannot be used in conjunction

Ø # withthe listen_ipv6 directive.

Ø listen=YES ( 如果设置为 YES , 则 vsftpd 将以独立模式运行,由vsftpd 自己监听和处理连接请求)

Ø # Thisdirective enables listening on IPv6 sockets. To listen on IPv4 and IPv6

Ø #sockets, you must run two copies of vsftpd whith two configuration files.

Ø # Makesure, that one of the listen options is commented !!

Ø #listen_ipv6=YES ( 设定是否支持IPV6)

Ø #pam_service_name=vsftpd ( 设置 PAM 外挂模块提供的认证服务所使用的配置文件名 ,即/etc/pam.d/vsftpd 文件,此文件中file=/etc/vsftpd/ftpusers字段,说明了PAM 模块能抵挡的帐号内容来自文件/etc/vsftpd/ftpusers中)

Ø #userlist_enable=YES/NO (此选项默认值为NO , 此时ftpusers 文件中的用户禁止登录FTP 服务器;若此项设为YES ,则 user_list 文件中的用户允许登录 FTP 服务器,而如果同时设置了 userlist_deny=YES ,则 user_list 文件中的用户将不允许登录FTP 服务器,甚至连输入密码提示信息都没有,直接被FTP 服务器拒绝)

Ø #userlist_deny=YES/NO (此项默认为YES ,设置是否阻扯user_list 文件中的用户登录FTP 服务器)

Ø tcp_wrappers=YES ( 表明服务器使用 tcp_wrappers 作为主机访问控制方式,tcp_wrappers 可以实现linux 系统中网络服务的基于主机地址的访问控制,在/etc 目录中的hosts.allow 和hosts.deny 两个文件用于设置tcp_wrappers 的访问控制,前者设置允许访问记录,后者设置拒绝访问记录。例如想限制某些主机对FTP 服务器192.168.57.2 的匿名访问,编缉/etc/hosts.allow 文件,如在下面增加两行命令:vsftpd:192.168.57.1:DENY vsftpd:192.168.57.9:DENY 表明限制IP 为192.168.57.1/192.168.57.9 主机访问IP 为192.168.57.2 的FTP服务器,此时FTP 服务器虽可以PING 通,但无法连接)

12、             匿名:anonymous,密码是没有的

13、             Vsftp根目录 /var/ftp/

a)        向下面的pub里面下载文件就可以了

b)        如果要上传,默认不允许,匿名anonymous上传。

14、             很多ftp用户管理跟linux用户管理放在一起的

15、             允许root用户上传(一般不用)

16、             允许root上传

a)        只需要更改两个配置文件文件;(/etc/vsftpd)

b)        改配置文件vsftpd.user_list(把root用户删除或者用#注释,#root)

c)        改配置文件vsftpd.user_ftpusers(把root用户删除或者用#注释,#root)

d)        再重新启动vsftp  service vsftpd restart

在这种情况下用root登录上去,默认登录根目录

17、             默认启动设置:

a)        方法一:chkconfig vsftpdon或chkconfig –level 5 vsftpd on

b)        只要在第2--5为on就能随机在哪个级别上启动,

c)        查看启动方式:chkconfig--list |grep vsftpd

d)        方法二:用vi打开:/etc/rc.local在里面加入/user/local/bin/vsftpd即可

18、             在配置vsftpd过程中linux的selinux默认下是启动的,有时候这个东西有加强安全性的同时很讨厌,比如让配置好的vsftpd无法正常登录,也无法上传。此时可以采用两种办法。

                        i.             一种办法:

#setsebool -P ftpd_disable_trans 1

然后重启vsftpd服务。

                      ii.             另一种办法,直接关掉selinux
vim /etc/sysconfig/selinux

selinux=disable

然后重启即可。

19、             或者先查看selinux的状态: getsebool –a或sestatus -v

a)        使用setsebool命令开启对应属性:setsebool ftpd_disable_trans on

b)        setsebool使用-P参数,无需每次开机都输入这个命令: setsebool -Pftpd_disable_trans on

c)         获取本机selinux策略值,也称为bool值。:getsebool -a  命令或sestatus -b


抱歉!评论已关闭.