I thought it was about time I shared something after all the hours I've committed to Pi-hacking and the above title says it all. These instructions
are very simple but should hopefully save you some trial-and-error.
Importantly, hat-tip to Insipid
Ramblings and Hexxeh for
their info and work that helped me get this far.
Firstly, I started with a slightly old version of Debian - namely the debian6-19-04-2012 image.
Your results may vary depending on what version you use. I am also assuming that you have already installed the image and can successfully boot to the desktop.
So, here goes:
1. Add UVC support to the image
Download and run rpi-update as
described here.
This will update your image to include the initially-missing UVC support.
Reboot as suggested.
2. Update your packages
sudo apt-get update
sudo apt-get upgrade
3. Install the guvcview webcam viewer
sudo apt-get install guvcview
4. Set up your permissions and enable the driver
sudo usermod -a -G video pi
sudo modprobe uvcvideo
Reboot the Pi.
5. Open up the cam (these are the settings that worked for me)
guvcview --size=544x288 --format=yuyv
Caveats
Well, you are almost done, there are a few things to keep in mind before you rush out to buy one of these webcams for your Pi.
- Before you view the C270 you must disconnect your mouse*. I am not sure if this is problem specific to my install but if I don't the camera will either not connect or will drop out constantly.
The error I saw was along the line of not having any "periodic" USB channels. - The resolution is low. Clicking on the above image will open it at full size (544x288). Trying resolutions above this didn't work.
- The webcam "must" be connected before powering up the Pi. If not you need to run sudo rmmod uvcvideo and sudo modprobe uvcvideobefore it will work.
Even with this caveats, this is better than nothing and step one towards my Pi-powered mobile robot.
Hopefully this how-to helps you out and if you have more luck than I using a mouse and/or higher resolutions please let me know in the comments.
* Now, "real" Linux people would say that you shouldn't be using one anyway, but when your goal is to use a webcam, it's somewhat inferred
that you'd like to see the result in a mouse-equipped GUI 