因为开着虚拟机时，xp识别不到。所以
先关掉虚拟机，安装xp上的ch341驱动。
然后虚拟机就可以识别到了。
=============
一直都是连接UART0-RS232 口。
家里电脑最右边口是com3
参考网上的资料http://hi.baidu.com/yzdxtcl/blog/item/56e7b37cf5a0560628388ab7.html
http://hi.baidu.com/rui2507/blog/item/931c911d0b7ef68386d6b635.html
===============
内核是否支持usb转串口
root@ubuntu:/home/zhangbin# lsmod | grep usbserial
usbserial 33019 1 ch341
================
ttyS0是电脑的串口1 com1
root@ubuntu:/home/zhangbin# dmesg | grep ttyS0
[ 1.390999] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.395378] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
如果没有使用USB转串口，而是直接使用串口，那么Serial Device要配置为/dev/ttyS0。
===============
root@ubuntu:/home/zhangbin# ls -l /dev/ttyS0
crw-rw---- 1 root dialout 4, 64 2011-03-02 04:57 /dev/ttyS0
=================
usb转串口，应该是ttyUSB0
root@ubuntu:/home/zhangbin# dmesg | grep ttyUSB0
[ 182.047428] usb 2-1: ch341-uart converter now attached to ttyUSB0
==============================
看下全部的 tty信息
root@ubuntu:/home/zhangbin# dmesg | grep tty*
[ 0.000000] console [tty0] enabled
[ 0.208788] CPU0 attaching sched-domain:
[ 0.209222] CPU1 attaching sched-domain:
[ 1.301387] pci 0000:00:01.0: setting latency timer to 64
[ 1.301491] pci 0000:00:15.0: setting latency timer to 64
[ 1.301555] pci 0000:00:15.1: setting latency timer to 64
[ 1.301606] pci 0000:00:15.2: setting latency timer to 64
[ 1.301656] pci 0000:00:15.3: setting latency timer to 64
[ 1.301707] pci 0000:00:15.4: setting latency timer to 64
[ 1.301757] pci 0000:00:15.5: setting latency timer to 64
[ 1.301808] pci 0000:00:15.6: setting latency timer to 64
[ 1.301858] pci 0000:00:15.7: setting latency timer to 64
[ 1.301908] pci 0000:00:16.0: setting latency timer to 64
[ 1.301959] pci 0000:00:16.1: setting latency timer to 64
[ 1.302009] pci 0000:00:16.2: setting latency timer to 64
[ 1.302060] pci 0000:00:16.3: setting latency timer to 64
[ 1.302110] pci 0000:00:16.4: setting latency timer to 64
[ 1.302163] pci 0000:00:16.5: setting latency timer to 64
[ 1.302213] pci 0000:00:16.6: setting latency timer to 64
[ 1.302264] pci 0000:00:16.7: setting latency timer to 64
[ 1.302314] pci 0000:00:17.0: setting latency timer to 64
[ 1.302364] pci 0000:00:17.1: setting latency timer to 64
[ 1.302414] pci 0000:00:17.2: setting latency timer to 64
[ 1.302465] pci 0000:00:17.3: setting latency timer to 64
[ 1.302515] pci 0000:00:17.4: setting latency timer to 64
[ 1.302565] pci 0000:00:17.5: setting latency timer to 64
[ 1.302615] pci 0000:00:17.6: setting latency timer to 64
[ 1.302666] pci 0000:00:17.7: setting latency timer to 64
[ 1.302716] pci 0000:00:18.0: setting latency timer to 64
[ 1.302767] pci 0000:00:18.1: setting latency timer to 64
[ 1.302818] pci 0000:00:18.2: setting latency timer to 64
[ 1.302868] pci 0000:00:18.3: setting latency timer to 64
[ 1.302918] pci 0000:00:18.4: setting latency timer to 64
[ 1.302968] pci 0000:00:18.5: setting latency timer to 64
[ 1.303019] pci 0000:00:18.6: setting latency timer to 64
[ 1.303069] pci 0000:00:18.7: setting latency timer to 64
[ 1.321390] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.321591] pcieport 0000:00:15.1: setting latency timer to 64
[ 1.321790] pcieport 0000:00:15.2: setting latency timer to 64
[ 1.321998] pcieport 0000:00:15.3: setting latency timer to 64
[ 1.322196] pcieport 0000:00:15.4: setting latency timer to 64
[ 1.322391] pcieport 0000:00:15.5: setting latency timer to 64
[ 1.322590] pcieport 0000:00:15.6: setting latency timer to 64
[ 1.322786] pcieport 0000:00:15.7: setting latency timer to 64
[ 1.322980] pcieport 0000:00:16.0: setting latency timer to 64
[ 1.323189] pcieport 0000:00:16.1: setting latency timer to 64
[ 1.323386] pcieport 0000:00:16.2: setting latency timer to 64
[ 1.323583] pcieport 0000:00:16.3: setting latency timer to 64
[ 1.323779] pcieport 0000:00:16.4: setting latency timer to 64
[ 1.323976] pcieport 0000:00:16.5: setting latency timer to 64
[ 1.324335] pcieport 0000:00:16.6: setting latency timer to 64
[ 1.325231] pcieport 0000:00:16.7: setting latency timer to 64
[ 1.325429] pcieport 0000:00:17.0: setting latency timer to 64
[ 1.325626] pcieport 0000:00:17.1: setting latency timer to 64
[ 1.325827] pcieport 0000:00:17.2: setting latency timer to 64
[ 1.326024] pcieport 0000:00:17.3: setting latency timer to 64
[ 1.326225] pcieport 0000:00:17.4: setting latency timer to 64
[ 1.326451] pcieport 0000:00:17.5: setting latency timer to 64
[ 1.326650] pcieport 0000:00:17.6: setting latency timer to 64
[ 1.326850] pcieport 0000:00:17.7: setting latency timer to 64
[ 1.327043] pcieport 0000:00:18.0: setting latency timer to 64
[ 1.327236] pcieport 0000:00:18.1: setting latency timer to 64
[ 1.327430] pcieport 0000:00:18.2: setting latency timer to 64
[ 1.327689] pcieport 0000:00:18.3: setting latency timer to 64
[ 1.327895] pcieport 0000:00:18.4: setting latency timer to 64
[ 1.327993] pcieport 0000:00:18.5: setting latency timer to 64
[ 1.328184] pcieport 0000:00:18.6: setting latency timer to 64
[ 1.329199] pcieport 0000:00:18.7: setting latency timer to 64
[ 1.337125] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.337229] ACPI: Power Button [PWRF]
[ 1.390999] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.391715] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.395378] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.396047] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.401522] input: Macintosh mouse button emulation as /devices/virtual/input/input1
[ 1.994252] rtc_cmos 00:04: setting system clock to 2011-03-02 12:49:29 UTC (1299070169)
[ 1.994329] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.994445] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.580536] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.581913] sd 2:0:0:0: [sda] Attached SCSI disk
[ 182.047428] usb 2-1: ch341-uart converter now attached to ttyUSB0
==============
设置minicom
minicom -s
串口设备是 ttyUSB0
波特率 115200 ，
数据位8，奇偶校验位无，停止位1.
硬件流控制无
软件流控制无。
=======
比如按A，就可以自动设置A的内容。
按回车是确定。
最后按回车退出设置界面。
前面界面 ，save as df1 ，设置为minicom默认的配置。
否则启动还是tty8
========================================
重启了虚拟机之后。
发现了这个问题啊。
root@ubuntu:/home/zhangbin# ls -l ttyUSB0
ls: cannot access ttyUSB0: No such file or directory
会这样的错误。
root@ubuntu:/home/zhangbin# dmesg | grep ttyUSB0
[ 6.909419] usb 2-1: ch341-uart converter now attached to ttyUSB0
[ 12.485283] type=1503 audit(1299071849.853:16): operation="open" pid=1550 parent=1533 profile="/usr/sbin/cupsd"
requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0"
存放的目录是/dev下的。
root@ubuntu:/home/zhangbin# ls -l /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 2011-03-02 05:17 /dev/ttyUSB0
====================================
启动minicom，成功识别到了板子的uboot的信息。
root@ubuntu:/home/zhangbin# minicom
Welcome to minicom 2.4
OPTIONS: I18n
Compiled on Jan 25 2010, 06:49:09.
Port /dev/ttyUSB0
Press CTRL-A Z for help on special keys
OK
U-Boot 1.1.6 (Jan 4 2011 - SMDK6410
CPU: S3C6410@Hz
Fclk = 800MHz, Hclk133MHz, Pclk = 66MHz, Serial = CUART (SYNC Mode)
Board: SMDK0
DRAM: 256 MB
Flash: 0 kB
NAND: Maf. ID is d3
1024 MB
In: serial
Out: serial
Err: serial
Hit any key 0
NAND read: device 0 offset 0x40000, size 0x300000
3145728 bytes read: OK
Boot with zImage
Starting kernel ...
Uncompressing Linux.............................................................
Linux version 2.6.28.6 (figo@figo-desktop) (gcc version 4.3.2 (Sourcery G++ Lit1
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: SMDK6410
Memory policy: ECC disabled, Data cache writeback
CPU S3C6410 (id 0x36410101)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C64XX: PLL settings, A=800000000, M=532000000, E=24000000
S3C64XX: HCLKx2=266666666, HCLK=133333333, PCLK=66666666
div1: 00000555
mout_apll: source is fout_apll (1), rate is 800000000
mout_epll: source is fout_epll (1), rate is 24000000
mout_mpll: source is mpll (1), rate is 532000000
mmc_bus: source is dout_mpll (1), rate is 44333333
mmc_bus: source is dout_mpll (1), rate is 44333333
mmc_bus: source is dout_mpll (1), rate is 44333333
usb-host-bus: source is mout_epll (0), rate is 24000000
uclk1: source is dout_mpll (1), rate is 66500000
spi_epll: source is mout_epll (0), rate is 24000000
spi_epll: source is mout_epll (0), rate is 24000000
sclk_audio0: source is mout_epll (0), rate is 24000000
sclk_audio1: source is mout_epll (0), rate is 24000000
sclk_audio2: source is mout_epll (0), rate is 24000000
irda-bus: source is mout_epll (0), rate is 24000000
s3c64xx: 10485760 bytes SDRAM reserved for fimc at 0x50810000
s3c64xx: 8388608 bytes SDRAM reserved for pp at 0x51210000
s3c64xx: 8388608 bytes SDRAM reserved for tv at 0x51a10000
s3c64xx: 6291456 bytes SDRAM reserved for mfc at 0x52210000
s3c64xx: 8388608 bytes SDRAM reserved for jpeg at 0x52810000
s3c64xx: 8388608 bytes SDRAM reserved for cmm at 0x53010000
s3c64xx: 19922944 bytes SDRAM reserved for s3c-g3d at 0x53810000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56896
Kernel command line: noinitrd console=ttySAC0 ubi.mtd=1 root=ubi0:rootfs rootfse
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 224MB = 224MB total
Memory: 152064KB available (5308K code, 928K data, 152K init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 797.90 BogoMIPS (lpj=1994752)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 288 bytes
NET: Registered protocol family 16
S3C6410 Power Management, (c) 2008 Samsung Electronics
S3C6410: Initialising architecture
S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
Total 32 DMA channels will be initialized.
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
S3C64XX ADC driver, (c) 2008 Samsung Electronics
S5P64XX ADC driver successfully probed
NetWinder Floating Point Emulator V0.97 (double precision)
ashmem: initialized
yaffs Jan 2 2011 16:55:25 Installing.
msgmni has been set to 297
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
S3C_LCD clock got enabled :: 133.333 Mhz
LCD TYPE :: WX4300F will be initialized
Window[0] - FB1: map_video_memory: clear ff000000:0007f800
FB1: map_video_memory: dma=5d200000 cpu=ff000000 size=0007f800
Window[0] - FB2: map_video_memory: clear ff03fc00:0003fc00
FB2: map_video_memory: dma=5d23fc00 cpu=ff03fc00 size=0003fc00
Console: switching to colour frame buffer device 60x34
fb0: s3cfb frame buffer device
Window[1] - FB1: map_video_memory: clear ff080000:0003fc00
FB1: map_video_memory: dma=5d1c0000 cpu=ff080000 size=0003fc00
Window[1] - FB2: map_video_memory: clear ff09fe00:0001fe00
FB2: map_video_memory: dma=5d1dfe00 cpu=ff09fe00 size=0001fe00
fb1: s3cfb frame buffer device
Window[2] - FB1: map_video_memory: clear ff0c0000:0003fc00
FB1: map_video_memory: dma=5d280000 cpu=ff0c0000 size=0003fc00
fb2: s3cfb frame buffer device
Window[3] - FB1: map_video_memory: clear ff100000:0003fc00
FB1: map_video_memory: dma=5d2c0000 cpu=ff100000 size=0003fc00
fb3: s3cfb frame buffer device
ledsinitialized.
s3c-aes initialized
S3C AES Drvier
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
brd: module loaded
loop: module loaded
nbd: registered device at major 43
pmem: 1 init
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
mcp251x_init(1063): start
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
dm9000 Ethernet Driver
eth0: dm9000 at ce890000,ce890004 IRQ 108 MAC: 00:22:12:34:56:90
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
console [netcon0] enabled
netconsole: network logging started
Linux video capture interface: v2.00
s3c-fimc: controller 0 registered successfully
s3c-fimc: controller 1 registered successfully
S3C6400 MFC Driver, (c) 2007 Samsung Electronics
S3C6400 MFC Driver, (c) 2007 Samsung Electronics
S3C PostProcessor Driver v3.12, (c) 2009 Samsung Electronics
S3C6410 TV encoder Driver, (c) 2008 Samsung Electronics
S3C6410 TV encoder Driver init OK.
S3C6410 TV scaler Driver, (c) 2008 Samsung Electronics
S3C6410 TV scaler Driver init OK.
S3C Rotator Driver, (c) 2008 Samsung Electronics
s3c_rotator_probe called
s3c_rotator_probe success
S3C JPEG Driver, (c) 2007 Samsung Electronics
s3c-g2d: Driver loaded succesfully
s3c-g2d: Module initialized.
s3c-g3d: Driver loaded succesfully
s3c-g3d: Module initialized.
S3C CMM Driver, (c) 2008 Samsung Electronics
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
Creating 2 MTD partitions on "NAND 1GiB 3,3V 8-bit":
0x00400000-0x00800000 : "cramfs"
0x00800000-0x40000000 : "ubifs"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 262144 bytes (256 KiB)
UBI: logical eraseblock size: 258048 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd1 to ubi0
UBI: MTD device name: "ubifs"
UBI: MTD device size:
UBI: number of good PEBs: 4064
UBI: number of bad PEBs: 0
UBI: max. allowed volume 128
UBI: wear-leveling thshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: ava 0
UBI: total number of reved PEBs: 4064
UBI: number of PEBs reserved for bad PEB handling: 40
UBI: max/mean erase countround thread "ubi_bgt0d" startedID 1053
spi->irq = 151
Max,Mipeed [33333333, 130208]Hz
Irq= IOmem=[0x7f00bfff-0x7f00b000] D[Rx-33, Tx-34]
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCIci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus nhci s3c2410-oh0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: US0: 2 ports detected
InitializinSB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storagd.
usbcore: registered new intece driver usbserial
USB Serial port registered for generic
usbcore: registered new interface driver usbserial_generic
usbserier core
USB Serial support regired for GSM modem (1-port)
usbce: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
s3c-udc : S Driver, (c) 2008-2009 Samsung Ectronics
s3c-udc : version 15 Mh 2009 (DMA Mode)
android adb driver
Registered gadget driver 'android_adb'
mice: PS/2 mouseall mice
gpio-keys init
input:io-keys as /devices/platform/gpio-keys/input/input0
S3C Touchscreen driver, (c) 2008ronics
S3C TouchScreen got load successfully : 12 bits
input: C TouchScreen as /devices/virtuaput/input1
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410_rtc: tickq 92
s3c2410-rtc s3c2410-rtc: risabled, re-enabling
s3c2410-rts3c2410-rtc: rtc core: registere3c as rtc0
i2c /dev entries drir
s3c2440-i2c s3c2440-i2c: slavddress 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 378 KHz
[CAMERA]camera_attach_adapter camera: 266.666 MHz, divisor: 11
parent clock for camera: 266.666parent clock for camera: 266.666 MHz, divisor: 9
CAMERA TVP5150 attached successf0-i2c: i2c-0: S3C I2C adapter
at24 0-0050: 1024 byte 24c08 EEPROM (writable)
sdhci: Secure Digr Interface driver
sdhci: Copyrt(c) Pierre Ossman
s3c-sdhci s3sdhci.0: clock source 0: hsmmc (133333333 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133i s3c-sdhci.0: clock source 2:)
mmc0: SDHCI controller on samsun] using ADMA
sdhci: card insert.
s3c-sdhci s3c-sdhci.1: clock rce 0: hsmmc (133333333 Hz)
s3chci s3c-sdhci.1: clock source 1:smmc (133333333 Hz)
s3c-sdhci ssdhci.1: clock source 2: mmc_bus (44333333 Hz)
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhusbcore: registered new interfad
usbhid: v2.6:USB HID core driver
Advanced Linuture Driver Version 1.0.18rc3.
sdhci: card removed.
ASoC version 0.13.2
WM9713/WM9714 SoC Audback: 1, capture : 1
asoc: AC97Fi <-> s3c64xx-ac97 mapping ok
[WM9713]Open speaker volume.
ALSA device list:
#0: SMDK640egistered
NET: Registered proto family 17
can: controller areaetwork core (rev 20081130 abi 8)
NET: Registered protocol family 29
RPC: Registered udp transpgistered tcp transport module.
ee80211: 802.11 data/management/trol stack, git-1.1.13
ieee8021Copyright (C) 2004-2005 Intel Cooration <jketreno@linux.intel.com>
VFP support v0.3: implementor 41 architecture 1 part 20 vari0-rtc s3c2410-rtc: )
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 1034514432 bytes (1010268 KiB, 986 MiB, 4009 LEBs)
UBIFS: journal size: 33546240 bytes (32760 KiB, 31 MiB, 130 LEBs)
UBIFS: media format: 4 (latest is 4)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 5182151 bytes (5060 KiB)
VFS: Mounted root (ubifs filesystem).
Freeing init memory: 152K
Failed to execute /init. Attempting defaults...
Try to bring eth0 interface up......eth0: link down
Done
Now,start.2.0....
Please press Enter to activate this console. s3c-nand: 1 bit(s corrected succesy
s3c-nand: 1 bit(s) error detected, corrected successfully
s3c-nor detected, corrected successfuy
s3c-nand: 1 bit(s) error detected, corrected successfully
s3c-n detected, corrected successfully
s3c-nand: 1 bit(s) error detectesuccessfully
s3c-nand: 1 bit(s) error detected, corrected successfully
s3c-nand: 1 bit(s) error detected, corrected successfully
Mouse type USB:/dev/input/mice unsupported
s3c-nand: 1 bit(s) error detected, corrected successfully
Warning: could not register server
====================
root@ubuntu:/home/zhangbin# lsmod
Module Size Used by
vmblock 10766 1
vsock 37070 0
vmmemctl 7296 0
vmhgfs 48997 0
binfmt_misc 6587 1
acpiphp 18284 0
nfsd 238967 13
exportfs 3437 1 nfsd
nfs 265078 0
lockd 64849 2 nfsd,nfs
nfs_acl 2245 2 nfsd,nfs
auth_rpcgss 33767 2 nfsd,nfs
sunrpc 193053 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
snd_ens1371 18814 2
gameport 9089 1 snd_ens1371
snd_ac97_codec 100646 1 snd_ens1371
ac97_bus 1002 1 snd_ac97_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70694 3 snd_ens1371,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26722 0
ch341 8088 1
snd_seq_midi 4557 0
snd_rawmidi 19056 2 snd_ens1371,snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ppdev 5259 0
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
psmouse 63245 0
usbserial 33019 3 ch341
serio_raw 3978 0
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
parport_pc 25962 1
snd 54180 14 snd_ens1371,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
intel_agp 24375 1
soundcore 6620 1 snd
snd_page_alloc 7076 1 snd_pcm
vga16fb 11385 1
vgastate 8961 1 vga16fb
shpchp 28820 0
vmci 26826 1 vsock
i2c_piix4 8335 0
agpgart 31724 1 intel_agp
lp 7028 0
parport 32635 3 ppdev,parport_pc,lp
pcnet32 28890 0
floppy 53016 0
mptspi 14652 2
mptscsih 31869 1 mptspi
mii 4381 1 pcnet32
mptbase 83022 2 mptspi,mptscsih
scsi_transport_spi 21096 1 mptspi
vmxnet 15418 0
注：minicom中有用的功能
命令帮助—“Ctrl A”后按“Z”
清屏 --“Ctrl A”后按“C”
设置 --“Ctrl A”后按“O”
发送文件--“Ctrl A”后按“S”
退出 --“Ctrl A”后按“Q”