* How to install the Bootloader :
- Open SAM-BA and connect it to the platform
- On the Dataflash section :
- Select the script "Enable Dataflash on CS0" and execute it
- Select the Script "Erase the Dataflash" and execute it
- Select the script "Send boot file", select the file FIRSBOOT.nbo and execute the script
- On the textbox "Adress" write 0x5000
- Select Eboot.nb0 in the "Send File Name"
- Click on Send File
Now the Bootloader is installed.
* How to install the nk.nb0 file :
- On the NandFlash section :
- Select the Script "NandFlash init" and execute it
- On the textbox "Adress" write 0x0
- Select the file NK.nb0 in the "Send File Name"
- click on Send File
* Start the Board :
- Press 7,change to "Lauch existing flash resident image at startup "
- On the bootloader menu select the "Image Flash Menu"
- Select "Enter Manually the Parameter"
- For the Physical Adress Start enter : 8006c000
- For the Starting IP enter : 8006d000
- For the total rom size enter: 02000000
- Select Quit...
- Select "Save configuration now"
- Restart the board
By Team Mcuzone
visit www.mcuzone.com for more detail
补充：经试验方法正确，但“Physical Adress Start ” “Starting IP” “ total rom size ”这三项的值
应按照wince demo提供的信息进行设置，或者按照编译结果信息进行设置。
本人用的MDK9263开发板下有S3，S4两个按钮 当串口输出信息SDMMC：InitDisk with pDisk后可
按S3， S4。终端显示：key 0/1 has been pressed!