现在的位置: 首页 > 综合 > 正文

Linux终端下的网络服务命令

2013年01月17日 ⁄ 综合 ⁄ 共 3323字 ⁄ 字号 评论关闭

根据IP查网卡地址

arping IP地址

根据IP查电脑名

nmblookup -A IP地址

查看当前IP地址

ifconfig eth0 |awk '/inet/ {split($2,x,":");print x[2]}'

查看当前外网的IP地址

w3m -no-cookie -dump www.ip138.com/ip2city.asp|grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}'
w3m -no-cookie -dump ip.loveroot.com|grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}'
curl ifconfig.me

查看当前监听80端口的程序

lsof -i :80

查看当前网卡的物理地址

ifconfig eth0 | head -1 | awk '{print $5}'

同一个网卡增加第二个IP地址

#在网卡eth0上增加一个1.2.3.4的IP:
sudo ifconfig eth0:0 1.2.3.4 netmask 255.255.255.0
#删除增加的IP:
sudo ifconfig eth0:0 down

立即让网络支持nat

echo 1 | sudo tee /proc/sys/net/ipv4/ip_forward
sudo iptables -t nat -I POSTROUTING -j MASQUERADE

查看路由信息

netstat -rn
sudo route -n

手工增加一条路由

sudo route add -net 192.168.0.0 netmask 255.255.255.0 gw 172.16.0.1

手工删除一条路由

sudo route del -net 192.168.0.0 netmask 255.255.255.0 gw 172.16.0.1

修改网卡MAC地址的方法

sudo ifconfig eth0 down #关闭网卡
sudo ifconfig eth0 hw ether 00:AA:BB:CC:DD:EE #然后改地址
sudo ifconfig eth0 up #然后启动网卡

永久改地址方法

sudo gedit /etc/network/interfaces

在 iface eth0 inet static 后面添加一行:

pre-up ifconfig eth0 hw ether 01:01:01:01:01:01

配置文件应该像如下

iface eth0 inet static
pre-up ifconfig eth0 hw ether 01:01:01:01:01:01
address 192.168.1.10
netmask 255.255.255.0
gateway 192.168.1.1

最后是 logout 或者reboot

统计当前IP连接的个数

netstat -na|grep ESTABLISHED|awk '{print $5}'|awk -F: '{print $1}'|sort|uniq -c|sort -r -n
netstat -na|grep SYN|awk '{print $5}'|awk -F: '{print $1}'|sort|uniq -c|sort -r -n
netstat -ntu | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n

统计当前所有IP包的状态

netstat -nat|awk '{print awk $NF}'|sort|uniq -c|sort -n

统计当前20000个IP包中大于100个IP包的IP地址

tcpdump -tnn -c 20000 -i eth0 | awk -F "." '{print $1"."$2"."$3"."$4}' | sort | uniq -c | sort -nr | awk ' $1 > 100 '

屏蔽IPV6

echo "blacklist ipv6" | sudo tee /etc/modprobe.d/blacklist-ipv6

察看当前网络连接状况以及程序

sudo netstat -atnp

查看网络连接状态

netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'

查看当前系统所有的监听端口

nc -zv localhost 1-65535

查看网络的当前流量

#安装 ethstatus 软件
sudo apt-get install ethstatus
#查看 ADSL 的速度
sudo ethstatus -i ppp0
#查看 网卡 的速度
sudo ethstatus -i eth0
#或安装 bwm-ng 
sudo apt-get install bwm-ng
#查看当前网络流量
bwm-ng

查看域名的注册备案情况

whois baidu.cn

查看到某一个域名的路由情况

tracepath baidu.cn

重新从服务器获得IP地址

sudo dhclient

从当前页面开始镜像整个网站到本地

wget -r -p -np -k http://www.21cn.com
· -r:在本机建立服务器端目录结构;
· -p: 下载显示HTML文件的所有图片;
· -np:只下载目标站点指定目录及其子目录的内容;
· -k: 转换非相对链接为相对链接。

如何多线程下载

sudo apt-get install axel
axel -n 5 http://xxx.xxx.xxx.xxx/xxx.zip
或者
lftp -c "pget -n 5 http://xxx.xxx.xxx.xxx/xxx.zip“

如何查看HTTP头

w3m -dump_head http://www.example.com
或 curl --head http://www.example.com

快速使用http方式共享目录

#进入需要共享的目录后运行: 
python -m SimpleHTTPServer
#其它电脑使用http://ip:8000 来访问
#自定义端口为8080: 
python -m SimpleHTTPServer 8080

SSH 远程端口转发

ssh -v -CNgD 7070 username@sshhostipaddress

监控网络所有的tcp数据

sudo apt-get install snort #安装snort入侵检测程序
sudo snort -vde

监控TCP/UDP连接的流量

sudo apt-get install iftop 
sudo iftop
#或
sudo apt-get install iptraf
sudo iptraf

iptables

防止外网用内网IP欺骗

#eth0 为外网网卡
sudo iptables -t nat -A PREROUTING -i eth0 -s 10.0.0.0/8 -j DROP
sudo iptables -t nat -A PREROUTING -i eth0 -s 172.16.0.0/12 -j DROP
sudo iptables -t nat -A PREROUTING -i eth0 -s 192.168.0.0/16 -j DROP 

查看nat规则

sudo iptables -t nat -L

查看filter规则

sudo iptables -L -n

取消nat规则

sudo iptables -t nat -F

取消filter规则

sudo iptables -F

阻止一个IP连接本机

#规则位于最后
sudo iptables -t filter -A INPUT -s 192.168.1.125 -i eth0 -j DROP 

关闭 1234 端口

sudo iptables -A OUTPUT -p tcp --dport 1234 -j DROP

开启 80 端口

sudo iptables -A INPUT -p tcp --dport 80 -j ACCEPT

限制访问80端口的外部IP最大只有50个并发

sudo iptables -A INPUT -p tcp --dport 80 -m connlimit --connlimit-above 50 --connlimit-mask 32 -j DROP

禁止一个IP或者一个IP段访问服务器端口服务

#80端口 ,规则插入到前面
sudo iptables -t filter -I INPUT -s 192.168.2.0/24 -p tcp --dport http -j DROP
#21端口,规则插入到前面
sudo iptables -t filter -I INPUT -s 192.168.1.23 -p tcp --dport ftp -j DROP

【上篇】
【下篇】

抱歉!评论已关闭.