学步园

传送门 ☞ Android兵器谱 ☞ 转载请注明 ☞ http://blog.csdn.net/leverage_1229

一、实验参数列表

二、MATLAB脚本（balanced job bounds.m）

clear;
 
N = input('SAN Performance N = ');
L = input('Queue length L = ');
Z = input('Thinking time Z = ');
 
%testing a group of datas
% N = 60;
% L = 32;
% Z = 0.23;
 
%model M/M/1
 
%host
E1 = 1/(64*33/8)+0.0002;
for n = 1 : L
    u(n) = (sqrt(n*n+4*n)-n)/2;    %utilization in percent
    rate(1,n) = u(n)/E1;   %I/O request rate in IOPS
    arate1 = sum(rate(1,n))/n;
end
 
    D(1) = E1 + arate1*(E1^2)/(2*(1-arate1*E1));
 
%fcf
E2 = 1/1062.5;
for n = 1 : L
    arate2 = rate(1,n);
    D(2) = arate2*(E2^2)/(2*(1-arate2*E2));
end
 
%dacc
h = 2.283;
v = 2.798;
E3 = 1/(64*66/8)+0.00016;
E4 = 1/(64*66/8)+0.00018;
ts = E3+(E3^2)*sqrt(1.39794);
for n = 1 : L
    u(n) = (sqrt(n*n+4*n)-n)/2;    %utilization in percent
    rate(3,n) = u(n)/E3;   %I/O request rate in IOPS 
    rate(4,n) = u(n)/E4;   %I/O request rate in IOPS 
    arate3 = sum(rate(3,n))/n;
    arate4 = sum(rate(4,n))/n;
    
D(3)=ts+((0.5*(h+(4*v-3*h-1)*0.5)+2*(1+h-2*v)*0.25)*(1/(E3^2))*arate3*E3*(2*(E3^2)))/((1/E3)-arate3);
D(4)=ts+((0.5*(h+(4*v-3*h-1)*0.5)+2*(1+h-2*v)*0.25)*(1/(E4^2))*arate4*E3*(2*(E4^2)))/((1/E3)-arate4);
end
 
Dmax = max(D(1:4));                             % maximum service demand per code              
Dsum = D(1)+D(2)+D(3)+D(4);           	% sum of total service demands
Davg = Dsum/4;                                  % average service demand per queue
 
for n = 1:N
    Rmin(n) = max(n * Dmax - Z, Dsum + ((n-1)*Davg*Dsum/(Dsum+Z))); % lower bound of response time 
    Rmax(n) = Dsum + ((n-1)*Dmax*(n-1)*Dsum/(((n-1)*Dsum)+Z));      % upper bound of response time    
end
 
% response time of MVA
for m = 2:4
    L(m) = 0;                    
end    
for n = 1:N
    R(1) = D(1);
    for m = 2:4
        R(m) = D(m) * (1 + L(m));
    end
    Tau = n / sum(R(:));
    for m = 2:4
        L(m) = Tau * R(m);          
    end
    
    Rn(n,1) = D(1);
    for m = 2:4
        Ln(n,m) = L(m);
        Rn(n,m) = R(m);
    end
    Taun(n) = Tau;
end
    
for n = 1:N    
    RTn(n) = sum(Rn(n,2:4));      % average response time    
end
 
t = 1:N;
 
% response time 
figure(1), plot(t, Rmin, 'g', t, RTn, 'r', t, Rmax, 'b'),xlabel('SAN performance (MB/s)'),ylabel('Response time(s)');

三、NSS（网络存储系统）边界性能