通过Terracotta实现Tomcat集群（2）

现在的位置: 首页 > 综合 > 正文

通过Terracotta实现Tomcat集群（2）

2013年01月13日 ⁄ 综合 ⁄ 共 3527字 ⁄ 字号小中大 ⁄ 评论关闭

上一篇利用Terracotta实现了最简单的Tomcat集群，只用到一台Terracotta服务器、一台nginx服务器，在实际应用中都可能发生单点故障。nginx可以通过keepalived配置为热备；Terracotta内置了热备，可以在每台Tomcat主机部署一个Terracotta，需要配置tc-config.xml，具体可参见官方文档。

配置Terracotta双机热备

1、配置terracotta（tc-config.xml）

<?xml version="1.0" encoding="UTF-8" ?>
<tc:tc-config xmlns:tc="http://www.terracotta.org/config"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://www.terracotta.org/schema/terracotta-6.xsd">
  <servers>
    <!-- Sets where the Terracotta server can be found. 
     Replace the value of host with the server's IP address. -->
    <server host="server.1.ip.address" name="Server1">
      <data>%(user.home)/terracotta/server-data</data>
      <logs>%(user.home)/terracotta/server-logs</logs>
      <statistics>%(user.home)/terracotta/server-statistics</statistics>

      <!--监听客户端连接的端口-->
      <dso-port>9510</dso-port>
      <!--监听Terracotta Developer Console连接的端口-->
      <jmx-port>9520</jmx-port>
      <!--Terracotta之间通信的端口-->
      <l2-group-port>9530</l2-group-port>

      <!-- Configuration data for DSO that's specific to the DSO server. -->
      <dso>
        <client-reconnect-window>120</client-reconnect-window>
        <persistence>
          <mode>temporary-swap-only</mode>
        </persistence>

        <garbage-collection>
          <enabled>true</enabled>
          <verbose>false</verbose>
          <interval>3600</interval>
        </garbage-collection>
      </dso>
    </server>

    <!-- If using a standby Terracotta server, also referred to as 
     an ACTIVE-PASSIVE configuration, add the second server here. -->
    <server host="server.2.ip.address" name="Server2">
      <data>%(user.home)/terracotta/server-data</data>
      <logs>%(user.home)/terracotta/server-logs</logs>
      <statistics>%(user.home)/terracotta/server-statistics</statistics>

      <dso-port>9510</dso-port>
      <jmx-port>9520</jmx-port>
      <l2-group-port>9530</l2-group-port>

      <dso>
        <client-reconnect-window>120</client-reconnect-window>
        <persistence>
          <mode>temporary-swap-only</mode>
        </persistence>

        <garbage-collection>
          <enabled>true</enabled>
          <verbose>false</verbose>
          <interval>3600</interval>
        </garbage-collection>
      </dso>
    </server>

    <ha>
      <mode>networked-active-passive</mode>
      <networked-active-passive>
         <election-time>5</election-time>
      </networked-active-passive>
    </ha>
  </servers>

  <!-- Sets where the generated client logs are saved on clients. -->
  <clients>
    <logs>%(user.home)/terracotta/client-logs</logs>
  </clients>
</tc:tc-config>

将tc-config.xml放到${TERRACOTTA_HOME}/bin目录下，启动命令：

/usr/local/terracotta/start-tc-server.sh -n Server1

/usr/local/terracotta/start-tc-server.sh -n Server2

也将tc-config.xml可放到其他目录下，启动时指定文件位置即可:

/usr/local/terracotta/start-tc-server.sh -f /usr/local/terracotta/tc-config.xml -n Server1

/usr/local/terracotta/start-tc-server.sh -f /usr/local/terracotta/tc-config.xml -n Server2

2、配置Tomcat集群

复制/usr/local/terracotta/sessions/terracotta-session-1.3.5.jar、/usr/local/terracotta/common/terracotta-toolkit-1.6-runtime-5.5.0.jar这两个jar到Tomcat下lib目录。

编辑$Tomcat_Home/conf/context.xml

<Context>
    <Valve className="org.terracotta.session.TerracottaTomcat60xSessionValve" tcConfigUrl="192.168.1.88:9510,192.168.1.102:9510" />
</Context>

tcConfigUrl指定多个Terracotta服务器的地址和端口，多个则用逗号分隔。

3、分别启动Terracotta、Tomcat、nginx（参照之前文章）

4、打开Terracotta开发工具dev-consol（参照之前文章）

a）只启动Server1中的Terracotta，可以看到Server1处于Active状态，Server2处于停机状态：