~ # switch_root
BusyBox v1.18.3 (2011-02-23 16:15:41 CST) multi-call binary.
Usage: switch_root [-c /dev/console] NEW_ROOT NEW_INIT [ARGS]
Free initramfs and switch to another root fs:
chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,
execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.
Options:
-c DEV Reopen stdio to DEV after switch
/下什么都删除了
proc都没有
手动执行mount
/ # exec /sbin/switch_root /mnt /linuxrc
-------------------rcS---------------------
pwd is /
mount: no /proc/mounts
ls: /mnt/dev/pts: No such file or directory
mount: mounting none on /dev/shm failed: No such file or directory
mount: mounting none on /dev/pts failed: No such file or directory
------------------set runtime env------------------
1)insmod
-------------------module.sh---------------------
r8168 Gigabit Ethernet driver 8.023.00-NAPI loaded
r8168: mcfg == RTL8168E/8111E (0014)
r8168 0000:00:01.0: no MSI. Back to INTx.
eth%d: RTL8168B/8111B at 0xc098c000, 00:00:00:00:00:00, IRQ 9
r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
r8168: lzm: eth1: Identified chip type is 'RTL8168E/8111E'.
r8168 Copyright (C) 2011 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
r8168: eth1: link down
-------------------module.sh end---------------------------
2)net
-------------------net.sh---------------------
configuring Ethernet...
-------------------net.sh end---------------------------
3)start telnetd
-------------------netfactory.sh---------------------
downloading mvqt.zip...
Connecting to 192.168.73.13 (192.168.73.13:80)
wget: can't connect to remote host (192.168.73.13): Connection refused
Connecting to 192.168.12.104 (192.168.12.104:80)
wget: can't connect to remote host (192.168.12.104): No route to host
download failed!
reload inittab
-------------------------------------------------
-------------------sata.sh---------------------
mount: mounting none on /proc/bus/usb failed: Device or resource busy
PART is sda
mount device /dev/sda1 !
mount: mounting /dev/sda1 on /opt/qtmarvell failed: No such file or directory
mount device /dev/sda1 failed!
dummy
dummy not exit!
-------------------------------------------------
------------------rcS end---------------------
can't open /dev/tty1: No such file or directory
can't open /dev/tty2: No such file or directory
can't open /dev/tty3: No such file or directory
can't open /dev/tty4: No such file or directory
can't open /dev/tty5: No such file or directory
can't open /dev/tty6: No such file or directory
can't open /dev/ttyS0: No such file or directory
switchroot之前 exec进入sh看：
/ # cat /proc/sys/kernel/hotplug
/sbin/hotplug
mount
rootfs on / type rootfs (rw)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/sda1 on /mnt type ext3 (rw,relatime,errors=continue,data=writeback)
插入u盘
fdisk 看不到sdb相关
dev节点也没有sdb
但是mdev -s之后都出现了
/ # mdev
BusyBox v1.18.3 (2011-02-23 16:15:41 CST) multi-call binary.
Usage: mdev [-s]
-s Scan /sys and populate /dev during system boot
It can be run by kernel as a hotplug helper. To activate it:
echo /sbin/mdev > /proc/sys/kernel/hotplug
It uses /etc/mdev.conf with lines
[-]DEVNAME UID:GID PERM [>|=PATH] [@|$|*PROG]
echo /sbin/mdev > /proc/sys/kernel/hotplug 之后，拔插会自动创建删除sdb节点
echo /sbin/hotplug > /proc/sys/kernel/hotplug之后，再把u盘拔了， fdisk -l看不到，但是/dev/sdb节点还在，猜测fdisk读的是/sys目录
看busybox的util-linux中fdisk和switchroot
发现fdisk -l读取的是/proc/partitions
---------------------------------------------------------------------------------------
switchroot之后exec进入sh看：
发现进入了新的根文件系统
/ # mount
mount: no /proc/mounts
/ # mount -t proc proc /proc
mount: mounting proc on /proc failed: No such file or directory
所以rcS中必须创建相应目录
/ # mount -a
mount: mounting none on /dev/shm failed: No such file or directory
mount: mounting none on /dev/pts failed: No such file or directory
分析原因：fstab按顺挂载，挂载到/dev目录时候把/dev下的shm和pts覆盖了，所以最好不用mount -a，而用手动创建目录并挂载，比较保险。
/ # cat etc/fstab
#dev mount-point type opt
proc /proc proc defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
sysfs /sys sysfs defaults 0 0
tmpfs /dev tmpfs defaults 0 0
none /proc/bus/usb usbfs defaults 0 0
none /dev/shm tmpfs defaults 0 0
none /dev/pts devpts defaults 0 0
todo：http://wolfwings.livejournal.com/228442.html
/bin/busybox umount /proc /bin/busybox umount /sys # And finally... switch to the new root filesystem: exec /bin/busybox switch_root /newroot /sbin/init # Oh-shit panic code, to drop us to a minimal busybox shell to examine the wreckage: echo Failure! Press enter to boot a shell instead... read exec /bin/busybox sh > /dev/tty1 < /dev/tty1 2>&1