前两天公司的一位哥们介绍了关于SRAM和DRAM的区别和用途，所以刚才上网找了一些资料，描述如下：
SRAM(Static Random Assessable Memory)-where the word static indicates that it, does not need to be periodically refreshed, as SRAM uses bistable latching circuitry （注：双稳态自锁电路）(i.e., flip-flops) to store each bit. Each bit is stored as a voltage（注：电压）.Each
memory cell requires six transistors,thus giving chip low density but high speed.However, SRAM is still volatile（注：这里可以理解为——不稳定的）in the (conventional) sense that data is lost when powered down. Disadvantages are more expensive and also consumes more power
than DRAM.
In high speed processors (such as Pentium), SRAM is known as cache memory and is included on the processor chip.However high-speed cache memory is also included external to the processor to improve total performance.
DRAM(Dynamic Random Assessable Memory)- Its advantage over SRAM is its structural simplicity（注：结构简单？）: only one transistor (MOSFET gates) and a capacitor（注：电容） (to store a bit as a charge) are required per bit, compared to six transistors in
SRAM. This allows DRAM to reach very high density.Also it consumes less power and is even cheaper than SRAM (except when the system size is less than 8 K) .
But the disadvantage is that since it stores bit information as charge which leaks;therfore information needs to be read and written again every few milliseconds.This is known as refreshing the memory and it requires extra circuitry,adding to the cost of system.