init: untracked pid 300 exited

现在的位置: 首页 > 综合 > 正文

init: untracked pid 300 exited

2013年09月11日 ⁄ 综合 ⁄ 共 36896字 ⁄ 字号小中大 ⁄ 评论关闭

Texas Instruments X-Loader 1.41 (Oct 21 2011 - 09:28:33)
OMAP4460: 1.2 GHz capable SOM
Starting OS Bootloader from MMC/SD1 ...


U-Boot 1.1.4-gedeced79 (Feb 6 2012 - 09:27:11)

Load address: 0x80e80000
DRAM: 1024 MB
Flash: 0 kB
Using default environment

In:    serial
Out:   serial
Err:   serial

efi partition table:
     256     128K xloader
     512     256K bootloader
    2048       8M recovery
   18432       8M boot
   34816     512M system
1083392     256M cache
1607680    6879M userdata
Net:   KS8851SNL
Hit any key to stop autoboot: 0
kernel   @ 80008000 (3665828)
ramdisk @ 81000000 (170470)
I2C read: I/O error

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.8-g52f4764 (jbq@jqueru.mtv.corp.google.com) (g2
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: OMAP4 Panda board
[    0.000000] Truncating RAM at 80000000-bfffffff to -afffffff (vmalloc region.
[    0.000000] Reserving 16777216 bytes SDRAM for VRAM
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] OMAP4460 ES1.1
[    0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xd000
[    0.000000] On node 0 totalpages: 190208
[    0.000000] free_area_init_node: node 0, pgdat c0751120, node_mem_map c08d100
[    0.000000]   Normal zone: 1536 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 188672 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 7 pages/cpu @c0edb000 s6912 r8192 d13568 u32768
[    0.000000] pcpu-alloc: s6912 r8192 d13568 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
[    0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G androidboot.c9
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 512MB 231MB = 743MB total
[    0.000000] Memory: 744604k/744604k available, 41828k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xf0800000 - 0xf8000000   ( 120 MB)
[    0.000000]     lowmem : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   ( 16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0046000   ( 248 kB)
[    0.000000]       .text : 0xc0046000 - 0xc06f2000   (6832 kB)
[    0.000000]       .data : 0xc06f2000 - 0xc0751900   ( 383 kB)
[    0.000000]        .bss : 0xc0751924 - 0xc08d05a8   (1532 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, 1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:410
[    0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_.
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 1s
[    0.000061] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
[    0.070404] pid_max: default: 32768 minimum: 301
[    0.070404] Mount-cache hash table entries: 512
[    0.070404] Initializing cgroup subsys debug
[    0.071777] Initializing cgroup subsys cpuacct
[    0.071777] Initializing cgroup subsys freezer
[    0.071777] CPU: Testing write buffer coherency: ok
[    0.072052] L310 cache controller enabled
[    0.072052] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache sB
[    0.150329] CPU1: Booted secondary processor
[    0.181579] Brought up 2 CPUs
[    0.181640] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
[    0.181915] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
[    0.185852] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_insr
[    0.185852] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_mai1
[    0.185882] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_mai2
[    0.185882] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
[    0.185913] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
[    0.185913] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
[    0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
[    0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_pre
[    0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
[    0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermar
[    0.186096] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_i
[    0.186096] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_i
[    0.186096] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[    0.187194] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
[    0.194915] omap_hwmod: mcpdm: cannot be enabled (3)
[    0.197265] print_constraints: dummy:
[    0.197265] NET: Registered protocol family 16
[    0.197265] GPMC revision 6.0
[    0.197265] EMIF0 is enabled with IRQ142
[    0.199707] EMIF1 is enabled with IRQ143
[    0.199737] Last reset was cold reset (PRM_RSTST=0x1)
[    0.199737]
[    0.199920] HSI: device registered as omap_hwmod: hsi
[    0.200439] OMAP GPIO hardware version 0.1
[    0.202697] omap_mux_init: Add partition: #1: core, flags: 2
[    0.204040] omap_mux_init: Add partition: #2: wkup, flags: 2
[    0.204040] ram_console: got buffer at a0000000, size 200000
[    0.204040] ram_console: found existing buffer, size 27414, start 27414
[    0.288665] console [ram-1] enabled
[    0.290008] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts
[    0.290008] omap_hwmod_mux_init: Could not allocate device mux entry
[    0.302734] OMAP DMA hardware revision 0.0
[    0.311462] bio: create slab <bio-0> at 0
[    0.312164] print_constraints: vwl1271: 1800 mV
[    0.312683] SCSI subsystem initialized
[    0.312683] usbcore: registered new interface driver usbfs
[    0.314117] usbcore: registered new interface driver hub
[    0.314453] usbcore: registered new device driver usb
[    0.330078] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
[    0.330932] Skipping twl internal clock init and using bootloader value (unk)
[    0.331481] twl6030: PIH (irq 39) chaining IRQs 368..387
[    0.333496] print_constraints: VUSB: 3300 mV normal standby
[    0.536376] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[    0.537200] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal stay
[    0.537780] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal stany
[    0.537780] print_constraints: VCXIO: 1800 mV normal standby
[    0.537780] print_constraints: VDAC: 1800 mV normal standby
[    0.539550] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normy
[    0.540252] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normy
[    0.541229] print_constraints: CLK32KG:
[    0.541870] print_constraints: VANA: 2100 mV normal standby
[    0.556640] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
[    0.572265] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
[    0.587890] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
[    0.587890] omap-rproc omap-rproc.0: dsp is available
[    0.587890] omap-rproc omap-rproc.1: ipu is available
[    0.587890] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.587890] Bluetooth: Core ver 2.16
[    0.590270] NET: Registered protocol family 31
[    0.590270] Bluetooth: HCI device and connection manager initialized
[    0.590576] Bluetooth: HCI socket layer initialized
[    0.590576] Bluetooth: L2CAP socket layer initialized
[    0.590576] Bluetooth: SCO socket layer initialized
[    0.591552] cfg80211: Calling CRDA to update world regulatory domain
[    0.591827] Switching to clocksource 32k_counter
[    0.595062] musb-hdrc: version 6.0, musb-dma, peripheral
[    0.595489] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bul)
[    0.595672] Switched to NOHz mode on CPU #1
[    0.595703] Switched to NOHz mode on CPU #0
[    0.596130] musb-hdrc: MHDRC RTL version 2.0
[    0.596252] musb-hdrc: setup fifo_mode 4
[    0.596252] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    0.596252] musb-hdrc musb-hdrc: USB Peripheral mode controller at fc0ab000 4
[    0.597137] NET: Registered protocol family 2
[    0.597137] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.597137] TCP established hash table entries: 131072 (order: 8, 1048576 by)
[    0.600860] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
[    0.600860] TCP: Hash tables configured (established 131072 bind 65536)
[    0.600860] TCP reno registered
[    0.605133] UDP hash table entries: 512 (order: 3, 32768 bytes)
[    0.605255] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
[    0.605438] NET: Registered protocol family 1
[    0.605438] Trying to unpack rootfs image as initramfs...
[    0.620635] Freeing initrd memory: 164K
[    1.710235] omap-iommu omap-iommu.0: ducati registered
[    1.711914] omap-iommu omap-iommu.1: tesla registered
[    1.720916] ashmem: initialized
[    1.727325] fuse init (API version 7.16)
[    1.727325] msgmni has been set to 1454
[    1.732604] io scheduler noop registered
[    1.732666] io scheduler deadline registered
[    1.733032] io scheduler cfq registered (default)
[    1.733032] start plist test
[    1.737121] end plist test
[    1.745300] OMAP DSS rev 4.0
[    1.753631] dsscomp: initializing.
[    1.753631] misc dsscomp: display0=generic_dpi_panel
[    1.753631] misc dsscomp: display1=hdmi_panel
[    1.754608] misc dsscomp: found 2 displays and 4 overlays
[    1.755004] could not allocate slot
[    1.755493] omap-rproc omap-rproc.1: powering up ipu
[    1.756011] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfy
[    1.756011] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfy
[    1.757141] rpmsg_virtio TX: 28 00 00 00 64 00 00 00 35 00 00 00 00 00 00 00.
[    1.757141] rpmsg_virtio TX: 72 70 6d 73 67 2d 72 65 73 6d 67 72 00 00 00 00.
[    1.757141] rpmsg_virtio TX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.
[    1.757904] rpmsg_virtio TX: 64 00 00 00 00 00 00 00                        .
[    1.757904] rpmsg_virtio TX: 28 00 00 00 64 00 00 00 35 00 00 00 00 00 00 00.
[    1.757904] rpmsg_virtio TX: 72 70 6d 73 67 2d 72 65 73 6d 67 72 00 00 00 00.
[    1.758453] rpmsg_virtio TX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.
[    1.758453] rpmsg_virtio TX: 64 00 00 00 00 00 00 00                        .
[    1.758453] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[    1.780578] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[    1.811157] in hpd work 1, state=0
[    1.811157] omapdss HDMI: ENTER hdmi_display_enable
[    1.811676] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[    2.888458] in hpd work 2, state=1
[    2.892242] console [ttyO2] enabled
[    2.968109] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[    3.108917] PVR: PVRCore_Init
[    3.112670] PVR: PVRSRVDriverProbe(pDevice=ee4ade00)
[    3.118377] PVR: SGX register base: 0x56000000
[    3.123352] PVR: SGX register size: 65535
[    3.127868] PVR: SGX IRQ: 53
[    3.131164] PVR: EnableSystemClocks: Enabling System Clocks
[    3.137420] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency ]
[    3.150604] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency ]
[    3.163726] PVR: PVRCore_Init: major device 251
[    3.171173] brd: module loaded
[    3.180877] loop: module loaded
[    3.188720] (stk) :sysfs entries created
[    3.188720] (stk) : debugfs entries created
[    3.213012] omap_temp_sensor omap_temp_sensor.0: omap_temp_sensor probed
[    3.220733] edid[000] = 00 ff ff ff ff ff ff 00 30 64 80 c9 86 18 00 00
[    3.228790] edid[010] = 30 14 01 03 80 26 1e 78 2a 6e 85 a2 5a 4d 94 24
[    3.236297] edid[020] = 1a 4f 54 bf ef 00 81 80 01 01 01 01 01 01 01 01
[    3.243865] edid[030] = 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
[    3.251495] edid[040] = 13 00 78 2d 11 00 00 1e 00 00 00 ff 00 31 38 34
[    3.258972] edid[050] = 41 42 48 41 30 30 36 32 37 38 00 00 00 fd 00 37
[    3.266387] edid[060] = 4b 1e 53 0e 00 0a 20 20 20 20 20 20 00 00 00 fc
[    3.273895] edid[070] = 00 4c 43 44 2d 4d 4f 4e 49 54 4f 52 0a 20 00 46
[    3.281341] edid[080] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.288848] edid[090] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.296386] edid[0a0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.303955] edid[0b0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.311431] edid[0c0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.318908] edid[0d0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.327423] PPP generic driver version 2.4.2
[    3.332885] PPP Deflate Compression module registered
[    3.338806] edid[0e0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.346191] PPP BSD Compression module registered
[    3.351562] edid[0f0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.359008] edid[100] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.366455] edid[110] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.373870] edid[120] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.381347] edid[130] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.388824] PPP MPPE Compression module registered
[    3.394195] NET: Registered protocol family 24
[    3.397735] edid[140] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.397796] edid[150] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.397827] edid[160] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.397857] edid[170] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.397857] edid[180] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.397888] edid[190] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.397888] edid[1a0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.397918] edid[1b0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.397949] edid[1c0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.397949] edid[1d0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.397979] edid[1e0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.398010] edid[1f0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.398010] panel size 38 by 30
[    3.493682] usbcore: registered new interface driver asix
[    3.499725] usbcore: registered new interface driver cdc_ether
[    3.506469] usbcore: registered new interface driver smsc95xx
[    3.513000] usbcore: registered new interface driver net1080
[    3.519470] usbcore: registered new interface driver cdc_subset
[    3.526123] usbcore: registered new interface driver zaurus
[    3.532470] cdc_ncm: 04-Aug-2011
[    3.536163] usbcore: registered new interface driver cdc_ncm
[    3.542572] usbcore: registered new interface driver zd1201
[    3.548950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.556518] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[    3.562896] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb1
[    3.571350] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[    3.593078] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[    3.599670] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.607208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[    3.615295] usb usb1: Product: OMAP-EHCI Host Controller
[    3.621215] usb usb1: Manufacturer: Linux 3.0.8-g52f4764 ehci_hcd
[    3.628082] usb usb1: SerialNumber: ehci-omap.0
[    3.633209] hub 1-0:1.0: USB hub found
[    3.633819] hub 1-0:1.0: 3 ports detected
[    3.671173] usbcore: registered new interface driver cdc_acm
[    3.677734] cdc_acm: USB Abstract Control Model driver for USB modems and ISs
[    3.686614] Initializing USB Mass Storage driver...
[    3.692199] usbcore: registered new interface driver usb-storage
[    3.698974] USB Mass Storage support registered.
[    3.704406] usbcore: registered new interface driver usbserial
[    3.710876] usbserial: USB Serial Driver core
[    3.715789] USB Serial support registered for Keyspan - (without firmware)
[    3.723541] USB Serial support registered for Keyspan 1 port adapter
[    3.730743] USB Serial support registered for Keyspan 2 port adapter
[    3.737854] USB Serial support registered for Keyspan 4 port adapter
[    3.745208] usbcore: registered new interface driver keyspan
[    3.751495] keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
[    3.960052] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    3.967712] android_usb gadget: Number of LUNs=1
[    3.972961] lun0: LUN: removable file: (no medium)
[    3.978729] android_usb gadget: android_usb ready
[    3.978729] mousedev: PS/2 mouse device common for all mice
[    3.990631] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.992279] usb 1-1: new high speed USB device number 2 using ehci-omap
[    4.006835] i2c /dev entries driver
[    4.010864] lirc_dev: IR Remote Control driver registered, major 249
[    4.018676] IR NEC protocol handler initialized
[    4.023803] IR RC5(x) protocol handler initialized
[    4.029083] IR RC6 protocol handler initialized
[    4.034088] IR JVC protocol handler initialized
[    4.039184] IR Sony protocol handler initialized
[    4.044281] IR RC5 (streamzap) protocol handler initialized
[    4.050537] IR LIRC bridge handler initialized
[    4.055541] dmm: probe base: fd300000, irq 145
[    4.061889] device-mapper: uevent: version 1.0.3
[    4.068664] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-m
[    4.078430] Bluetooth: HCI UART driver ver 2.2
[    4.083404] Bluetooth: HCI H4 protocol initialized
[    4.088775] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
[    4.097259] (stc): st_register(2)
[    4.097381] cpuidle: using governor ladder
[    4.097381] cpuidle: using governor menu
[    4.101043] usbcore: registered new interface driver usbhid
[    4.101593] usbhid: USB HID core driver
[    4.120758] (stc): chnl_id list empty :2
[    4.121124] logger: created 256K log 'log_main'
[    4.121124] logger: created 256K log 'log_events'
[    4.121124] logger: created 256K log 'log_radio'
[    4.121124] logger: created 256K log 'log_system'
[    4.121490] OMAP HSI: HSI DRIVER Version 0.4.1
[    4.122741] omap_hsi omap_hsi.0: Registering IRQ mpu_p1 (99)
[    4.122863] omap_hsi omap_hsi.0: Registering IRQ mpu_dma (103)
[    4.123016] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
[    4.125549] SDP4430 SoC init
[    4.173950] (stk) : st_kim_start
[    4.202758] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    4.203643] asoc: null-codec-dai <-> MultiMedia1 mapping ok
[    4.206207] asoc: null-codec-dai <-> MultiMedia2 mapping ok
[    4.208099] asoc: null-codec-dai <-> Voice mapping ok
[    4.209503] asoc: null-codec-dai <-> Tones mapping ok
[    4.210906] asoc: null-codec-dai <-> Vibra mapping ok
[    4.211791] asoc: null-codec-dai <-> MODEM mapping ok
[    4.212463] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
[    4.213256] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[    4.215759] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
[    4.217895] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Steree
[    4.218841] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[    4.219696] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[    4.220703] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[    4.221405] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[    4.222259] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[    4.223388] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[    4.224121] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[    4.225067] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
[    4.228424] input: Panda Headset Jack as /devices/platform/soc-audio/sound/c1
[    4.237091] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
[    4.237762] ALSA device list:
[    4.237762]   #0: TI OMAP4 Board
[    4.237762]   #1: OMAP4HDMI
[    4.237915] GACT probability NOT on
[    4.237945] Mirror/redirect action on
[    4.237945] u32 classifier
[    4.237945]     Actions configured
[    4.237976] Netfilter messages via NETLINK v0.30.
[    4.237976] nf_conntrack version 0.5.0 (11637 buckets, 46548 max)
[    4.237976] ctnetlink v0.93: registering with nfnetlink.
[    4.239440] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    4.239440] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    4.239837] xt_time: kernel timezone is -0000
[    4.239837] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.242767] arp_tables: (C) 2002 David S. Miller
[    4.242767] TCP cubic registered
[    4.243103] NET: Registered protocol family 10
[    4.250640] Mobile IPv6
[    4.250640] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    4.251159] IPv6 over IPv4 tunneling driver
[    4.257476] NET: Registered protocol family 17
[    4.258209] NET: Registered protocol family 15
[    4.258361] Bluetooth: RFCOMM TTY layer initialized
[    4.258361] Bluetooth: RFCOMM socket layer initialized
[    4.258361] Bluetooth: RFCOMM ver 1.11
[    4.258422] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.258422] NET: Registered protocol family 35
[    4.258422] lib80211: common routines for IEEE802.11 drivers
[    4.258941] lib80211_crypt: registered algorithm 'NULL'
[    4.258941] VFP support v0.3:
[    4.482055] android_work: did not send uevent (0 0   (null))
[    4.488861] implementor 41 architecture 3 part 30 variant 9 rev 4
[    4.495727] ThumbEE CPU extension supported.
[    4.500549] Registering SWP/SWPB emulation handler
[    4.513061] Reprogramming LPDDR2 timings to 400000000 Hz
[    4.519653] Power Management for TI OMAP4.
[    4.525512] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L.
[    4.536163] sr_init: No PMIC hook to init smartreflex
[    4.542022] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver inid
[    4.551177] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver inid
[    4.555664] (stk) :ldisc_install = 1
[    4.555694] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.572570] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver inid
[    4.572570] hub 1-1:1.0: USB hub found
[    4.585906] hub 1-1:1.0: 5 ports detected
[    4.586029] sr_class1p5_driver_init: OMAP4460: add 10mV margin for class 1.5
[    4.586547] SmartReflex class 1.5 driver: initialized (86400000ms)
[    4.595367] clock: disabling unused clocks to save power
[    4.597198] mmc0: host does not support reading read-only switch. assuming w.
[    4.597259] mmc0: new SDHC card at address 0007
[    4.601776] mmcblk0: mmc0:0007 SD8GB 7.48 GiB
[    4.612915] Alternate GPT is invalid, using primary GPT.
[    4.612915] mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    4.658477] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[    4.682647] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nomin0
[    4.702636] sr_class1p5_calib_work: core: Calibration complete: Voltage Nomi0
[    4.721862] android_work: did not send uevent (0 0   (null))
[    4.738006] android_work: did not send uevent (0 0   (null))
[    4.769134] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[    4.784820] mmc1: card claims to support voltages below the defined range. T.
[    4.804168] sr_class1p5_calib_work: core: Calibration complete: Voltage Nomi0
[    4.829376] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[    4.837036] mmc1: new SDIO card at address 0001
[    4.905029] android_work: sent uevent USB_STATE=CONNECTED
[    4.941955] usb 1-1.1: new high speed USB device number 3 using ehci-omap
[    4.949737] android_work: sent uevent USB_STATE=DISCONNECTED
[    4.987640] android_work: sent uevent USB_STATE=CONNECTED
[    4.994110] android_work: sent uevent USB_STATE=DISCONNECTED
[    5.069763] sr_class1p5_calib_work: mpu Stop sampling: Voltage Nominal=102501
[    5.079681] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[    5.090209] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    5.097961] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumbe0
[    5.108459] smsc95xx v1.0.4
[    5.127258] cannot apply mgr(lcd) on inactive device
[    5.133087] omapfb omapfb: failed to apply dispc config
[    5.138854] cannot apply mgr(lcd2) on inactive device
[    5.144836] omapfb omapfb: failed to apply dispc config
[    5.150665] omapdss DPI: Could not find exact pixel clock. Requested 74250 kz
[    5.162506] android_work: sent uevent USB_STATE=CONNECTED
[    5.168792] regulator_init_complete: VANA: incomplete constraints, leaving on
[    5.178375] regulator_init_complete: VCXIO: incomplete constraints, leaving n
[    5.187744] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    5.196197] Freeing init memory: 248K
[    5.206848] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_.
[    5.218872] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[    5.233703] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0b
[    5.344299] keychord: using input dev gpio-keys for fevent
[    5.344482] usb 1-1.3: new full speed USB device number 4 using ehci-omap
[    5.463348] usb 1-1.3: New USB device found, idVendor=10c4, idProduct=ea60
[    5.472930] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumbe3
[    5.481750] usb 1-1.3: Product: CP2102 USB to UART Bridge Controller
[    5.489013] usb 1-1.3: Manufacturer: Silicon Labs
[    5.495269] usb 1-1.3: SerialNumber: 0001
[    5.513793] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. )
[    5.710327] (stk) :ldisc installation timeout
[    5.710998] (stk) :ldisc_install = 0
[    6.214538] EXT4-fs (mmcblk0p6): recovery complete
[    6.240020] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. c
[    6.285980] wl1271: loaded
[    6.289459] wl1271: initialized
[    6.881439] (stk) : timed out waiting for ldisc to be un-installed
[    6.975860] (stk) :ldisc_install = 1
[    8.135375] (stk) :ldisc installation timeout
[    8.140930] (stk) :ldisc_install = 0
[    8.614105] EXT4-fs (mmcblk0p7): recovery complete
[    8.632232] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. c
[    8.700073] init: cannot find '/vendor/bin/pvrsrvinit', disabling 'pvrsrvini'
[    8.712371] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[    8.727996] init: cannot find '/system/etc/install-recovery.sh', disabling ''
[    8.741882] android_usb: already disabled
[    8.745605] adb_bind_config
[    8.751068] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducatn
[    8.753448] adb_bind_config
[    8.755798] warning: `adbd' uses 32-bit capabilities (legacy support in use)
[    8.755798] adb_open
[    8.919067] android_work: sent uevent USB_STATE=DISCONNECTED
[    8.959564] android_work: sent uevent USB_STATE=CONNECTED
[    8.969177] android_work: sent uevent USB_STATE=DISCONNECTED
[    9.043975] android_work: sent uevent USB_STATE=CONNECTED
shell@android:/ $ [    9.296630] (stk) : timed out waiting for ldisc to be un-id
[    9.416961] (stk) :ldisc_install = 1
[    9.466003] android_usb gadget: high speed config #1: android
[    9.473388] android_work: sent uevent USB_STATE=CONFIGURED
[    9.473876] (stc): st_tty_open
[    9.473907] (stk) :line discipline installed
[    9.489288] (stk) :TIInit_7.6.15.bts
[    9.810668] (stc): add_channel_to_table: id 2
[    9.816253] (stc): st_register(3)
[    9.820220] (stc): add_channel_to_table: id 3
[    9.825653] (stc): st_register(4)
[    9.829803] (stc): add_channel_to_table: id 4
[   11.704315] init: untracked pid 100 exited
[   11.886047] (stc): remove_channel_from_table: id 2
[   11.891662] (stc): remove_channel_from_table: id 3
[   11.897033] (stc): remove_channel_from_table: id 4
[   11.903625] (stc): all chnl_ids unregistered
[   11.908966] (stk) :ldisc_install = 0
[   11.914276] (stc): st_tty_close
[   11.914367] (stc): 2 not un-registered
[   11.921936] (stc): 3 not un-registered
[   11.921936] (stc): 4 not un-registered
[   14.973175] init: untracked pid 251 exited
[   19.399017] init: untracked pid 257 exited
[   23.839874] init: untracked pid 263 exited

shell@android:/ $ [   27.615844] alarm_set_rtc: no RTC, time will be lost on ret
[   29.369384] init: untracked pid 269 exited
[   29.386932] init: untracked pid 274 exited

shell@android:/ $
shell@android:/ $
shell@android:/ $ [   33.925323] init: untracked pid 293 exited
[   35.168609] init: untracked pid 300 exited
[   38.606719] init: untracked pid 319 exited
[   38.674835] init: untracked pid 323 exited