CenterOS Insatall Nginx
++++++++++++++++++++++++++++++++++++++
安装相关依赖库：
++++++++++++++++++++++++++++++++++++++
yum -y install gcc gcc-c++ glibc glibc-devel glib2 glib2-devel libxml2-devel autoconf
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.30.tar.gz
tar zxvf pcre-8.30.tar.gz
cd pcre-8.30
./configure
make
make install
wget http://www.openssl.org/source/openssl-1.0.1c.tar.gz
tar zxvf openssl-1.0.1c.tar.gz
cd openssl-1.0.1c
./configure --prefix=/usr/local/openssl
make depend
make
make install
++++++++++++++++++++++++++++++++++++++
安装nignx
++++++++++++++++++++++++++++++++++++++
wget http://sysoev.ru/nginx/nginx-0.6.31.tar.gz
tar zxvf nginx-0.6.31.tar.gz
cd nginx-0.6.31
./configure --with-http_stub_status_module --with-http_ssl_module --prefix=/usr/local/nginx/
make
make install
cd /usr/local/ngin/sbin/nginx -t
if error:
ldd $(which /usr/local/nginx/sbin/nginx)
export LIBRARY_PATH=/usr/local/lib/
export LIBRARY_PATH=/usr/local/lib/root/pcre-8.30/.libs/
if 64Bit System:
cd /lib64
ln -s /usr/local/lib/libpcre.so.1.0.0 libpcre.so.1
else:
cd /lib
ln -s /usr/local/lib/libpcre.so.1.0.0 libpcre.so.1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
附nginx ./configure选项如下：
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--prefix=<path> - Nginx安装路径。如果没有指定，默认为 /usr/local/nginx
--sbin-path=<path> - Nginx可执行文件安装路径。只能安装时指定，如果没有指定，默认为<prefix>/sbin/nginx
--conf-path=<path> - 在没有给定-c选项下默认的nginx.conf的路径。如果没有指定，默认为<prefix>/conf/nginx.conf
--pid-path=<path> - 在nginx.conf中没有指定pid指令的情况下，默认的nginx.pid的路径。如果没有指定，默认为 <prefix>/logs/nginx.pid
--lock-path=<path> - nginx.lock文件的路径
--error-log-path=<path> - 在nginx.conf中没有指定error_log指令的情况下，默认的错误日志的路径。如果没有指定，默认为 <prefix>/logs/error.log
--http-log-path=<path> - 在nginx.conf中没有指定access_log指令的情况下，默认的访问日志的路径。如果没有指定，默认为 <prefix>/logs/access.log
--user=<user> - 在nginx.conf中没有指定user指令的情况下，默认的nginx使用的用户。如果没有指定，默认为 nobody
--group=<group> - 在nginx.conf中没有指定user指令的情况下，默认的nginx使用的组。如果没有指定，默认为 nobody
--builddir=DIR - 指定编译的目录
--with-rtsig_module - 启用 rtsig 模块
--with-select_module --without-select_module - Whether or not to enable the select module. This module is enabled by default if a more suitable method such as kqueue, epoll, rtsig or /dev/poll is not discovered by configure.
//允许或不允许开启SELECT模式，如果 configure 没有找到更合适的模式，比如：kqueue(sun os),epoll (linux kenel 2.6+), rtsig(实时信号)或者/dev/poll(一种类似select的模式，底层实现与SELECT基本相 同，都是采用轮训方法) SELECT模式将是默认安装模式
--with-poll_module --without-poll_module - Whether or not to enable the poll module. This module is enabled by default if a more suitable method such as kqueue, epoll, rtsig or /dev/poll is not discovered by configure.
--with-http_ssl_module - Enable ngx_http_ssl_module. Enables SSL support and the ability to handle HTTPS requests. Requires OpenSSL. On Debian, this is libssl-dev.
//开启HTTP SSL模块，使NGINX可以支持HTTPS请求。这个模块需要已经安装了OPENSSL，在DEBIAN上是libssl
--with-http_realip_module - 启用 ngx_http_realip_module
--with-http_addition_module - 启用 ngx_http_addition_module
--with-http_sub_module - 启用 ngx_http_sub_module
--with-http_dav_module - 启用 ngx_http_dav_module
--with-http_flv_module - 启用 ngx_http_flv_module
--with-http_stub_status_module - 启用 "server status" 页
--without-http_charset_module - 禁用 ngx_http_charset_module
--without-http_gzip_module - 禁用 ngx_http_gzip_module. 如果启用，需要 zlib
--without-http_ssi_module - 禁用 ngx_http_ssi_module
--without-http_userid_module - 禁用 ngx_http_userid_module
--without-http_access_module - 禁用 ngx_http_access_module
--without-http_auth_basic_module - 禁用 ngx_http_auth_basic_module
--without-http_autoindex_module - 禁用 ngx_http_autoindex_module
--without-http_geo_module - 禁用 ngx_http_geo_module
--without-http_map_module - 禁用 ngx_http_map_module
--without-http_referer_module - 禁用 ngx_http_referer_module
--without-http_rewrite_module - 禁用 ngx_http_rewrite_module. 如果启用需要 PCRE
--without-http_proxy_module - 禁用 ngx_http_proxy_module
--without-http_fastcgi_module - 禁用 ngx_http_fastcgi_module
--without-http_memcached_module - 禁用 ngx_http_memcached_module
--without-http_limit_zone_module - 禁用 ngx_http_limit_zone_module
--without-http_empty_gif_module - 禁用 ngx_http_empty_gif_module
--without-http_browser_module - 禁用 ngx_http_browser_module
--without-http_upstream_ip_hash_module - 禁用 ngx_http_upstream_ip_hash_module
--with-http_perl_module - 启用 ngx_http_perl_module
--with-perl_modules_path=PATH - 指定 perl 模块的路径
--with-perl=PATH - 指定 perl 执行文件的路径
--http-log-path=PATH - Set path to the http access log
--http-client-body-temp-path=PATH - Set path to the http client request body temporary files
--http-proxy-temp-path=PATH - Set path to the http proxy temporary files
--http-fastcgi-temp-path=PATH - Set path to the http fastcgi temporary files
--without-http - 禁用 HTTP server
--with-mail - 启用 IMAP4/POP3/SMTP 代理模块
--with-mail_ssl_module - 启用 ngx_mail_ssl_module
--with-cc=PATH - 指定 C 编译器的路径
--with-cpp=PATH - 指定 C 预处理器的路径
--with-cc-opt=OPTIONS - Additional parameters which will be added to the variable CFLAGS. With the use of the system library PCRE in FreeBSD, it is necessary to indicate --with-cc-opt="-I /usr/local/include". If we are using select() and it is necessary to increase the number of file descriptors, then this also can be assigned here: --with-cc-opt="-D FD_SETSIZE=2048".
--with-ld-opt=OPTIONS - Additional parameters passed to the linker. With the use of the system library PCRE in FreeBSD, it is necessary to indicate --with-ld-opt="-L /usr/local/lib".
--with-cpu-opt=CPU - 为特定的 CPU 编译，有效的值包括：pentium, pentiumpro, pentium3, pentium4, athlon, opteron, amd64, sparc32, sparc64, ppc64
--without-pcre - 禁止 PCRE 库的使用。同时也会禁止 HTTP rewrite 模块。在 "location" 配置指令中的正则表达式也需要 PCRE
--with-pcre=DIR - 指定 PCRE 库的源代码的路径
--with-pcre-opt=OPTIONS - Set additional options for PCRE building
--with-md5=DIR - Set path to md5 library sources
--with-md5-opt=OPTIONS - Set additional options for md5 building
--with-md5-asm - Use md5 assembler sources
--with-sha1=DIR - Set path to sha1 library sources
--with-sha1-opt=OPTIONS - Set additional options for sha1 building
--with-sha1-asm - Use sha1 assembler sources
--with-zlib=DIR - Set path to zlib library sources
--with-zlib-opt=OPTIONS - Set additional options for zlib building
--with-zlib-asm=CPU - Use zlib assembler sources optimized for specified CPU, valid values are: pentium, pentiumpro
--with-openssl=DIR - Set path to OpenSSL library sources
--with-openssl-opt=OPTIONS - Set additional options for OpenSSL building
--with-debug - 启用调试日志
--add-module=PATH - Add in a third-party module found in directory PATH
good luck~~~~~~